GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 10 of 10
  1. #1

    Default Recent purchase 93 1500 sitting on the bump stops

    93 1500 with custom work from Show Trucks USA.
    I do not know if the conversion company did the lowering or if someone else lowered it.

    Does any one have any ideas how to raise the truck up a couple of inches to get the ride off of the bump stops?
    I've had the truck only a few days and have not had the chance to get it on a lift to get a good inspection of the suspension.
    More info soon.

  2. #2


    I was in Oriellys auto today and saw some coil spring spacers. I am wondering if these will lift the front end up an inch and if they are worth the money?

  3. #3


    Any one have a problem with there lower A arm rubbing on there rim. My rims are the stock.

  4. #4


    Quote Originally Posted by dogred View Post
    I was in Oriellys auto today and saw some coil spring spacers. I am wondering if these will lift the front end up an inch and if they are worth the money?
    Huh, I've got no clue what those things do. Spring spacers?

    10 Chevy Traverse LT AWD
    02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
    99 Chevy Cavalier LS (105K+ miles - commuter car)
    78 Chevy Suburban Silverado (454, 3/4 ton)
    62 GMC 3/4 ton Pickup (350 police interceptor)

    Remember: Search Before Posting | Fill out Your Profile & Signature
    * I've been saying for years that I was going to change my username, and I finally did.

  5. #5


    Is your truck 2 or 4 wheel drive? If it is 4, then you can probably turn the torsion bars up to raise the front. Out back, a set of lift blocks might be what you need. It is really impossible to tell what you need without knowing how the lowering job was done, what they took off or added in to get the truck lower.
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.

    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  6. #6


    You really need to get under it and find out how they dropped it.
    If it's 2wd the coilspring spacers might lift the front a little bit but it probably wont hold it off the bump stops long.
    Without knowing the mechanics of the drop I would say you'll probably need to buy new springs front and rear.
    Those spacers only lift 1 loop of the coil, if it's been cut it wont lift enough.

  7. #7


    All I know about the front is that it has beltech shocks. The rear had an axle flip done to it. The seller said that the spindles are beltech also. I do not know how they look compared to stock ones. I need to get out to the junk yard to get a look at some stock ones. I think I will just take the rig to firestone or a shop like it to get an opinion of some one who deals with suspensions all day.

  8. #8


    I wonder if these will help out my front end from grinding the rims.

  9. #9

  10. #10


    I had to grind the rain channels on the front and rear of the lower control arms. This is a common thing if you run stock 15'' or 16'' rims. Found out that my front end has lowering coils and spindles. I think I will go with some stock springs in the front and that should lift it 2''.
    Old Show Trucks USA conversion
    Custom Paint, interior (Wood grain and leather seats) windows so dark you need a flash light to see me, stock rims, headers, dual exhaust.

Similar Threads

  1. 2001 Suburban: why are front lower control arms sitting on bump stops?
    By bazar01 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 3
    Last: 02-27-2012, 07:05 PM
  2. Recent purchase of a 94 C1500
    By smabe in forum Chevy C/K Truck Forum
    Replies: 5
    Last: 01-29-2012, 09:38 AM
  3. How to know if bump stops are bad?
    By Tim Tholen in forum General Chevy & GM Tech Questions
    Replies: 6
    Last: 11-20-2011, 10:21 PM
  4. 89 Chevy C-1500 PU Starts then Stops
    By filmorofyou2 in forum Member Introductions
    Replies: 1
    Last: 10-27-2011, 11:34 PM
  5. Tips and mods for my recent purchase
    By Nathan Kenney in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 4
    Last: 04-19-2011, 03:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts