GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11

    Default

    Including at least the headlights. I haven't figured out what I'm doing with the fogs yet, mostly because I haven't figured out ultimately what I'm doing with the bumper yet.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  2. #12

    Default

    Slacker.....

  3. #13

    Default

    Alright, so here's a question then. If I get end up with a winch bumper like I'm considering, what do you do with the fogs? Do I have to get new housings? Does that typically come with the bimper? How does that work?

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  4. #14

    Default

    Most bumpers I looked at for my truck offer mounting hole for factory fogs.

  5. #15

    Default

    Right, the ones I looked at do offer the holes. My question is, the factory ones I have are rectangle. So they'd come off with the bumper obviously. But how do I mount the new ones in the holes? Do I just buy separate aftermarket fogs? I know, seems like a simple question, but it's just something at the back of my mind that I don't have the obvious answer to.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  6. #16

    Default

    The best winch bumper for the money for us is the fab fours, I finally figured it all out today looking at a white silverado with a road armor bumper. The huge thing is the fab fours come with nice Hellas already on. Most other winch bumpers for our trucks just have holes so you can put your own lights in,(this kid had walmart blue lens lights in his. Looked like crap to me),unless you wanna spend another 400 dollars on top of what it cost for the other bumpers I'd go with fab fours and it looks good. I'm trying to get my account acceptable so I can order front a rear fab fours bumpers so I can have them this summer
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

  7. #17

    Default

    That's good to know. The Fab Fours are what I was looking at anyway, front and back. Thanks for the heads up. They're not on the top of my shopping list, but they're not low either, so I'll likely go that way.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Finally, Bigger tires, new wheels installed. Pics!
    By ewarz in forum Wheels & Tires
    Replies: 20
    Last Post: 12-02-2010, 12:00 PM
  2. Finally, Bigger tires, new wheels installed. Pics!
    By ewarz in forum Wheels & Tires
    Replies: 20
    Last Post: 12-02-2010, 12:00 PM
  3. Finally Wheels and Tires Installed
    By ajfdirtrider in forum Wheels & Tires
    Replies: 12
    Last Post: 02-21-2010, 09:09 PM
  4. Finally got my wheels and tires on, tell me what you think.
    By adampaul1964 in forum Photo & Video Gallery
    Replies: 17
    Last Post: 06-04-2009, 02:50 PM
  5. finally, picture of truck with new wheels and tires!
    By mxracer919 in forum Photo & Video Gallery
    Replies: 16
    Last Post: 04-21-2009, 06:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •