Results 1 to 10 of 102
Thread: New Transmission Cooler....
07-13-2011, 12:30 PM #1
New Transmission Cooler....A few years back I installed, a Mag-Hytec Aluminum Finned Deep Transmission Pan, after noticing that my Transmission Temps were running around....180-190 and sometimes just over 200 Degrees, after installing it, I saw a Drop in my Transmission Temp's to around 180/190 Degrees.....But I still was Not Comfortable having my Transmission running at these number's.......even tho these number's are with-in the Temp's expressed in the Owner's Manual.........As I and Most of you guys Know the Biggest Killer of Auto Transmission's is.....HEAT!!!.
After doing some research regarding Swapping out my Factory Trans. Cooler with a Larger Aftermarket Transmission Cooler......The Aftermarket Transmission Cooler of choice I was seeing, is the True Cool 40K Transmission Cooler.
So after ordering not only the 40K Cooler, I ordered a EAD's Transmission Mounting Bracket Kit, which comes with New Upper and Lower Mounting Brackets for the 40k Cooler.....along with all the Mounting Bolts-n-Hardware and 2 Inverted Flair Fittings and the Compression Fitting.
Below are some pictures of the install of the True Cool 40K Transmission Cooler
Factory Transmission Cooler
New True Cool 40K Installed With New EAD Upper and Lower Mounting Brackets
Install of the Inverted Flair Fittings to both of the Transmission Hard-lines
Install of the Compression(Brass)Fitting........to be able to Spin the Passenger Side Hard-Line 180 Degrees to Line-Up/Fit onto the Threads of the 40K Cooler
Below are the Items/Parts that come with the 40K Cooler
True Cool 40K Transmission Cooler
The 2 Inverted Flair Fittings and Compression(Brass)Fitting that were supplied in the EAD Mounting Bracket Kit,........This past Saturday we when Boating and this was the first time Towing my Boat with the New 40K Transmission Cooler.....the Temp's were in the low to mid 90's.......the Transmission Temp's Never went over 150 Degrees!!.......about 30/40 Degrees Cooler than with the Factory Transmission Cooler......I would just say that this is without question the Best Mod I've done to help with Cooling my Transmission Temps.......
Mag-Hytec Transmission Pan
Anyone Towing a Boat or Travel/Car Trailer....this would be a item to keep in mind for a Up-Grade......The Time it took to do the installed.......was a little over Hour......for the most part this was Plug and Play Installed, the only Mod was the cutting of the Passenger-Side Hard-lines for the Compression Fitting.....
Last edited by 99'HEARTBEAT; 06-14-2013 at 11:05 AM. Reason: Added Infor.
07-13-2011, 12:34 PM #2
Wow thats quite an improvement over the factory trans coolerDavid
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2002 Nissan Altima (My Commuter)
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
07-13-2011, 12:40 PM #3
Ya David, I was Very Pleased when seeing the Trans. Temp I mentioned, this new cooler is almost....3 Times Larger than the Factory Cooler.....after hearing/reading about other guys who have done this Cooler Swap, I felt it was worth a try.....I'm glad I did this Upgrade!!
Last edited by 99'HEARTBEAT; 07-23-2012 at 12:16 PM.
07-13-2011, 12:55 PM #4
did you notice any difference with engine temps (going up) due to the larger area covering the radiator? Probably wouldnt due to the fans doing a good job of pulling air through the radiator but thought I'd ask.
07-13-2011, 01:38 PM #5
07-13-2011, 02:42 PM #6
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
That looks like stock and works better my fav type of mod.. guess i need to take a look at one for the ram since we all know how much those trannys like heat even though i have the new 5spd auto! thanks for showing how easy is actually is!Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
07-13-2011, 02:48 PM #7
Nice mod and informative write up Mike, sounds worth doing even though I don't tow much.Adam
07-13-2011, 03:47 PM #8
- Join Date
- Dec 2004
- Arlington, Texas, United States
- Blog Entries
Well, that's very interesting to say the least. It makes sense that a larger trans cooler would do a much more effective job for cooling, I didn't think it would do that much of a difference. 90 degrees is like nice bath water, lol.
10 Chevy Traverse LT AWD
02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
99 Chevy Cavalier LS (105K+ miles - commuter car)
78 Chevy Suburban Silverado (454, 3/4 ton)
62 GMC 3/4 ton Pickup (350 police interceptor)
Remember: Search Before Posting | Fill out Your Profile & Signature
Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
Support GMTC: Help the site, contribute today
07-13-2011, 03:49 PM #9
Nice write-up Mike!:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
07-13-2011, 06:00 PM #10
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
Those are good numbers Mike. Your weather is about the same as here during boating season. How much does your boat & trailer weigh?1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
By Fitzi722 in forum General Chevy & GM Tech QuestionsReplies: 7Last Post: 06-30-2011, 11:38 PM
By Tiny1987 in forum Chevy Truck AccessoriesReplies: 1Last Post: 04-05-2011, 05:47 PM
By DutchTBI in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 2Last Post: 03-03-2007, 10:48 AM
By coachw-n-themrs in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 0Last Post: 07-07-2006, 12:37 AM