Results 11 to 13 of 13
04-03-2012, 06:20 PM #11
I seem to have every bolt out to drop it except one....the one dead center at the top. Is there a secret that I don't know about? I have pulled the crossmember, and dropped the tranny/transfer case to the point that the transfer case is sitting on the next crossmember back. I think I can see this bolt with a flashlight looking from the back of the transmission, but not 100% sure I am looking at the right bolt. It looks like it is a stud with another bracket over it....who in their right mind would do that to us?
I am thinking I am going to go ahead and drop the transfer case first, then do the transmission on it's own...this would allow me to drop it a little further and might make it possible to get to with a U-joint and 10 foot extension (slight exaggeration). But...I have a question about separating the tranny and transfer case. See pic first:
Do I pull the bolts (A), or the nuts (B)? In other words, does the adapter stay on the tranny or the transfer case. According to the Haynes manual, I pull the nuts....but that just doesn't feel right to me. It looks to me like there is a seal between the adapter and the transfer case, and not at the tranny, which makes me think the adapter should stay on the transfer case. Any thoughts on this?Everyone should own a Ford once in their life....how else can you truly appreciate a Chevy?
04-04-2012, 08:40 AM #12
I pulled both on my tranny and replaced the gasket.
04-04-2012, 09:18 AM #13
- Join Date
- Mar 2012
- Lynden, WA
the adaptor should stay on the tranny
1984 Chevy K5 Blazer
-454 Edelbrock V8
-33" BFG Mud Tires
2006 Chevy Silverado K1500 LT Z71 - 5.3 V8
-Flowmaster 40 with dual tailpipes
By Fitzi722 in forum General Chevy & GM Tech QuestionsReplies: 7Last: 06-30-2011, 10:38 PM
By BobbyB26 in forum GM PowertrainReplies: 5Last: 01-08-2011, 06:01 PM
By groceryman in forum Maintenance & UpkeepReplies: 3Last: 10-18-2010, 07:41 PM
By ChevyFan in forum The Coffee Shop ~ Chit ChatReplies: 0Last: 06-08-2007, 11:53 AM
By ChevyFan in forum The Coffee Shop ~ Chit ChatReplies: 0Last: 06-08-2007, 09:20 AM
Tags for this Thread