GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27
  1. #11

    Default

    That front bumper is nice. Is it also a Fab four?

  2. #12

    Default

    Quote Originally Posted by SurrealOne View Post
    I'd love to see some pics ... both of the intermediate stage (bumpers on) and then when the flares and liner are done. (IMHO it's always interesting to see the transitions.)
    Will do, probably going to clean up the bumpers tomorrow morning, then start taking my old bumpers off. Hopefully i can get them on tomorrow.

    Quote Originally Posted by LB'07-Z View Post
    Awesome deal I think the LEDs between the bumper and grill will be pretty sweet too.
    I agree, i was going to make my own light bar, if you know how they have the LED light bars below the tailgate, but a smaller one in the front, that has white running lights, and then amber turn signals.

    Quote Originally Posted by aloxdaddy99 View Post
    That front bumper is nice. Is it also a Fab four?
    It is the exact same design as fab fours, just a knock off.
    www.youtube.com/ippielb
    2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax
    6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case
    EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection
    35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump
    AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake
    Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars
    NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims
    Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light
    BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat
    Electric Fan Autometer Pressure, Boost, and Pyro Gauges
    4.56 Gears Airlift Air Bag Suspension

  3. #13

    Default

    Awesome finds. I'm going to start searching around here soon on CL and ebay and see if I can find some similar deals. Then I'll just convince my wife to store it all in the garage for me. I'm sure she'll be thrilled about that!! I can't wait to see your truck with the new additions.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  4. #14

    Default



    all finished the rear bumper.

    Cleane up all the surface rust on the front bumper and cleaned it up, painted it with some rust paint for the time being.
    www.youtube.com/ippielb
    2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax
    6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case
    EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection
    35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump
    AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake
    Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars
    NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims
    Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light
    BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat
    Electric Fan Autometer Pressure, Boost, and Pyro Gauges
    4.56 Gears Airlift Air Bag Suspension

  5. #15

    Default

    This is what i did yesterday

    This is what i'm doing today, Got the front bumper on, and brackets on, needs a lot of changes.

    Hanging the front bumper to see some of the changes that need to be made. Tractors are very helpful when you're working by yourself.

    And a better look of how my truck will be when it's finished.
    www.youtube.com/ippielb
    2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax
    6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case
    EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection
    35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump
    AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake
    Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars
    NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims
    Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light
    BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat
    Electric Fan Autometer Pressure, Boost, and Pyro Gauges
    4.56 Gears Airlift Air Bag Suspension

  6. #16

    Default

    Have you decided if you are going to get them lineX'd? I think if you got both bumpers sprayed and did the side step bars the same it would make an already nice looking truck look even better. I love those bumpers!!!

  7. #17

    Default

    Quote Originally Posted by aloxdaddy99 View Post
    Have you decided if you are going to get them lineX'd? I think if you got both bumpers sprayed and did the side step bars the same it would make an already nice looking truck look even better. I love those bumpers!!!
    Yes they are getting line-x coated. I was thinking about getting the whole rocker panel area coated as well. I am in middle of makin brackets for the front bumper as this bumper was on a duramax before and frame width is wider and a lot lower so I have I make totally different brackets.
    www.youtube.com/ippielb
    2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax
    6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case
    EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection
    35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump
    AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake
    Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars
    NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims
    Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light
    BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat
    Electric Fan Autometer Pressure, Boost, and Pyro Gauges
    4.56 Gears Airlift Air Bag Suspension

  8. #18

    Default

    Just finished putting the bumper on my truck tonight, will get pictures up tomorrow with it all finished! (Until i get some changes done to the bumper)
    www.youtube.com/ippielb
    2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax
    6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case
    EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection
    35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump
    AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake
    Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars
    NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims
    Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light
    BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat
    Electric Fan Autometer Pressure, Boost, and Pyro Gauges
    4.56 Gears Airlift Air Bag Suspension

  9. #19

    Default

    That looks awesome. And it's a huge help. I'm been looking at the same bumpers for my truck and seeing them on another truck makes me that much more comfortable. I've been a little nervous with my plans since they'll completely change the look of my truck and I don't want to do it wrong. You've convinced me I'm planning things right. Awesome job and better truck.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  10. #20

    Default

    Thanks @ippielb for letting us live vicariously through your photos. I'll bet the front turned out great given how good the back looks (as well as how good the front looked when you were using the tractor to position it.)

    What kind of modifications were required for the front?

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Fathers Day Gifts?
    By Steve in forum The Coffee Shop ~ Chit Chat
    Replies: 6
    Last Post: 06-20-2011, 09:41 PM
  2. Real Father's Day Gifts! What do you want?
    By Steve in forum The Coffee Shop ~ Chit Chat
    Replies: 6
    Last Post: 06-19-2010, 04:54 AM
  3. AC Update?
    By crane557 in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 05-22-2009, 10:22 PM
  4. update from before
    By foxbmx in forum Chevy C/K Truck Forum
    Replies: 5
    Last Post: 01-28-2009, 10:24 PM
  5. Another update
    By Steve in forum Announcements & Feedback
    Replies: 4
    Last Post: 01-08-2009, 02:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •