Results 21 to 27 of 27
04-05-2012, 06:23 PM #21
Well, here it is. My luck though, hit a goose on the way to work, and its head only hit the park light... Not the huge heavy duty steel bumper i put on to prevent that thing from happening.
As for modifications, all i did was drill one extra hole in the frame rail further back in the frame, around 2", right on where the frame has the angled part. The brackets did not work at all, so i had to cut a 4" section of it out, and also the mounting frame on the bumper was too spaced apart so i had to cut a slot into the one half of the bracket, and then slide the other half into it, and weld the bracket up solid, and reinforced. Rear bumper i needed to drill one extra hole as well.
2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax 6.5" BDS Suspension Lift Key'd to 9" Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection 35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires PPE Tuner until i tune it with my EFI Live Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder Leveling kit & 34.5" Nitto Grapplers 18" XD Rims Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat Electric Fan Autometer Pressure, Boost, and Pyro Gauges 4.56 Gears AFE Stage 2 Intake
04-05-2012, 07:56 PM #22David
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2002 Nissan Altima (My Commuter)
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
04-05-2012, 11:20 PM #23
- Join Date
- Jul 2010
- Denver, CO
- Blog Entries
The toughness factor of your truck just increased 10 fold....very nice!
Mike (Denver, CO) - 2008 Sierra 1500 Z71 SLE 5.3L 4WD
SUSPENSION: Rancho 4" Suspension Lift; Rancho RS9000XL Shocks; Rancho Skid Plates; Rancho MyRide Wireless Shock Controller;
TIRES: BFG All Terrain KO 315/70/17
DRIVE TRAIN: 4.56 Gears; Detroit TrueTrac Differential; True Cool 40k Transmission Cooler
PERFORMANCE: DiableSport Predator Tuner; Custom Tuned by Diablew; Magnaflow Exhaust; AFE Cold Air Intake
ELECTRONICS: Kenwood DNX6180 Touchscreen; Subthump box w/10" Kicker; Driver Information Center (DIC); Rear View Camera
ACCESSORIES: Westin Brush/Grill Gaurd; Westin Nerf Bars; Truxedo Tonneau; 20% Tint; Tow Mirrors w/Heat & Signals
04-06-2012, 04:30 AM #24
You can drive through a concrete wall now. Just not a goose. A goose will mess you up. That does about figure though. Thanks for the updated pics. That does a whole lot for your truck imo. Looks great.
To Be Completed (Eventually):
6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp
04-06-2012, 06:34 AM #25
DAMN GOOSE!! The truck looks great!! Now you just need to score some PIAA 520's to fill the holes. Keep us posted.
04-06-2012, 09:36 AM #26
Looks awesome man! The goose probably moved at the last minute once he realized there was a massive black thing that would definatley mess him up in front of him! lol Can't wait to see it after you get the LEDs installed.
'02 Chevrolet 2500hd
6.6 Duramax LB7
3.5" Straight Pipe
4" MBRP Black Exhaust Tip
TSC Black Low Profile Tool Box
Maverick Brush Guard
04-06-2012, 07:21 PM #27
Yes, i have been pricing out lights, i hate having expensive taste... $650 for an LED light bar for the front gap, and then $600 a piece for PIAA HID lights... Also going to look into getting signal lights put into the air vent holes, maybe a skinnier light bar as well.
Thanks for the positive comments.
By Steve in forum The Coffee Shop ~ Chit ChatReplies: 6Last Post: 06-20-2011, 10:41 PM
By Steve in forum The Coffee Shop ~ Chit ChatReplies: 6Last Post: 06-19-2010, 05:54 AM
By crane557 in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 05-22-2009, 11:22 PM
By foxbmx in forum Chevy C/K Truck ForumReplies: 5Last Post: 01-28-2009, 11:24 PM
By Steve in forum Announcements & FeedbackReplies: 4Last Post: 01-08-2009, 03:11 PM