GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

View Poll Results: Mod the 5.3 or Upgrade to the 6.2?

Voters
11. You may not vote on this poll
  • Mod the 5.3 From here on out

    9 81.82%
  • Upgrade to the 6.2

    2 18.18%
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1

    Default Mod the 5.3 or Upgrade to 6.2?

    Good Morning/Afternoon/Evening GMTC Members,

    So as you can tell from my signature, I'm compiling a rather lengthly list of things I want to do to my truck including modding the engine to a degree. My plan is to keep my truck and hand it down to my 7 and 4 year old when they're all licensed and legal to start driving. Therefore, I have no plans of getting rid of it anytime soon, if ever. That also means that whatever mods I do to it, I don't want to have a severely negatively impact longevity. As I began listing the things I want to do to the engine, intake, exhaust, etc.. I began thinking.... Should I mod the 5.3 or upgrade to the 6.2? I'm planning to have my current truck paid off in the next 2-3 months and I've considered upgrading when I get back in Country whether that be during my vacation in December or when I'm back for good in early 2013. I figure I could get a 2010 or so used Silverado/Sierra and could probably get a pretty decent deal since I'd be paying cash.

    If it helps your decision at all, I'm hoping to buy a couple family offroad and water toys in the next year or two so I'll be doing some towing, but nothing that either engine couldn't handle. I really just want increased performance and capability. I also figured that if I get the 6.2, if I decided to still mod it, the mods would just add that much more. On the other hand, the 90 extra hp might stave off the desire to mod much for a while.

    Therefore, my question is, given the parameters, would you go ahead and start modding the 5.3 for the long haul? Or would you upgrade to the 6.2 and use that as the base for the next 10-12 years?

    As always, thank you for your inputs and opinions.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  2. #2
    Legend


    Enkeiavalanche's Avatar
    Join Date
    Apr 2010
    Location
    Piermont,NY, back in Northern NJ now, But may be in IL soon....
    Posts
    5,319

    Default

    Go for the HD.... With price's on gas going up AGAIN!!! Go for that other Fuel.... And good luck.. There is a guy from the Avalanche club that did it to his Avalanche.. Here is a link to it..http://www.chevyavalancheclub.com/in...c,11798.0.html Hey he's not to far from you....LOL
    08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X

  3. #3

    Default

    That's something else I forgot to mention. The 6.2 is flex fuel. So that's it, I want to be green. That's my motivation..... Yeah, I can't even convince myself of that. It's a thought though, although if I remember correctly, the E85 is inefficient as heck in those engines.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  4. #4

    Default

    I've got a small feeling that this thread (http://www.gmtruckclub.com/forum/sho...tock-lm7-block) will be compiling some information that you may be interested in. I'm planning on going a little more extreme than you are thinking of.. but with some of the mods, a simple change of actual parts decision could help you out, and seeing as how ls series engines are all compatible for the most part, should keep the longevity you desire from your pickup.



    ---------- Post added at 07:42 AM ---------- Previous post was at 07:38 AM ----------

    also.. for what you're looking for.. cost AND manual labor(upgrading to 6.2) VS actual power differences(modded 5.3 to the stock 6.2) ..IMO.. putting a 6.2 doesn't even make sense.


    ..flex fuel = useless..

    "If you're not living life on the edge, You're taking up too much space"

    "Truck Norris"
    - 2008 TX Edition Silverado
    - McGaughy's 4/5 Drop Kit
    - Apline Type R 10s & Amp
    - Pioneer 6 Disc Touchscreen Deck
    - Nightmare Breed Motorsports custom tune
    - Custom 3" dual exhaust through x-pipe dumped at axle
    - Airaid CAI
    - Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
    "Kristine" - 1991 Nissan 240sx
    - Cut to pieces, LS build pending

  5. #5

    Default

    As a point of clarity, I wasn't going to do an engine swap, but rather trade my truck in for another. That being said, I've argued in favor of both inside my own head. Hence the poll. And thanks for the link.

    ---------- Post added at 05:10 AM ---------- Previous post was at 04:52 AM ----------

    You're right Rado, I am intrigued by that thread. I hadn't ventured into there yet. The biggest difference between you and I though is that I don't have the facilities, nor the ability as it currently stands, to do the work myself. That would be a large part to considering the cost. Indeed, I'd love to get those numbers from the 5.3 which would make going for the 6.2 a moot point. I'm just not sure which would be more cost effective if I'm having to pay for labor.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  6. #6
    Legend

    Red Z71 Max's Avatar
    Join Date
    May 2011
    Location
    Myrtle Beach, SC
    Posts
    2,334
    Blog Entries
    1

    Default

    I can tell you from experience that a 6.2 is in no way shape or form a green engine. I get 10.5 mpg around town and 14 mpg on the highway. It doesn't matter how I drive it. If I drive it easy or hard its the same all the time. I even tried E85 and the fuel mileage was even worse. With fuel prices the way they are now, if your truck is a daily driver I would leave it stock. Unless you plan on drag racing or 4X4 competition you will never be able to use the power on public highways without breaking the law and jeapordizing the lives of others that are on the highway with you. Just my 2 cents

    (Scott) Myrtle Beach, SC
    January 2012 ROTM WINNER
    2011 GMC Sierra Z71 MAX 6.2 L w/ Trailering Package
    Rough Country, XD Rockstars, Nitto Trail Grapplers, N Fab, Lund Genesis, Putco, Gator Grip,
    Flowmaster 40 series, Diablosport InTune, Banks Ram Air CAI,
    WeatherTech, AVS Aeroskin, Tow Mirrors, Upgradeyourauto.com

  7. #7

    Default

    And there's the wisdom choice. Btw, I was kidding about the "green". No, I'd never drag race it. Offroading? Once I get the lift, suspension, etc.. I do plan to play with it. Not to a point I could say I needed 400+ hp with a straight face. Still, I know I'll do something at some point. Probably nothing major, but if I drive it for 10+ years, I'll run out of little things to do eventually.

    To Be Completed (Eventually):
    6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp

  8. #8

    Default

    Quote Originally Posted by Jeremy09LTZCrew View Post
    As a point of clarity, I wasn't going to do an engine swap, but rather trade my truck in for another. That being said, I've argued in favor of both inside my own head. Hence the poll. And thanks for the link.

    ---------- Post added at 05:10 AM ---------- Previous post was at 04:52 AM ----------

    You're right Rado, I am intrigued by that thread. I hadn't ventured into there yet. The biggest difference between you and I though is that I don't have the facilities, nor the ability as it currently stands, to do the work myself. That would be a large part to considering the cost. Indeed, I'd love to get those numbers from the 5.3 which would make going for the 6.2 a moot point. I'm just not sure which would be more cost effective if I'm having to pay for labor.
    Ahhh.. I was mistaken by the 6.2 upgrade thing haha. The way I see it (although nobody really asked lol) seeing as how you are going to be paying off your pickup.. why trade it in, only to have yet another payment to uphold?

    Taking into consideration your input as far as not having the facilities and being overseas (duh lol!).. rather than going to the extremes as I plan to, why not just do stuff that you can do yourself with a weekend, some hand tools, a torque wrench, and sending your ECU in to get tuned? Yourself you can bolt up a set of heads w/ valvetrain, cam, a higher flow intake, and put headers on it. Sending your ECU to get tuned to the company you purchase your cam from (which they will be more than glad to assist you in putting the correct cam for your power range/driveability desires in your hands and tuning the ECU if you provide them with the specs for your heads/intake) would take the longest out of all of these options. This would leave you with minimal (if any) machine shop needs if you are careful in which parts you purchase.

    Now, doing this with the motor still in the truck is not impossible, but would be a pain probably as far as being able to torque the bolts you need to.

    You are probably looking at around $4000 for top of the line performance, making the $4000 mark a little high in all actuality for what you're lookin to get.

    $4,000 Vs $38,000 for a 6.2 with crap-for-mileage. (and there are companies out there who make cam/valvetrain sets that allow you to keep your 5.3's AFM)


    "If you're not living life on the edge, You're taking up too much space"

    "Truck Norris"
    - 2008 TX Edition Silverado
    - McGaughy's 4/5 Drop Kit
    - Apline Type R 10s & Amp
    - Pioneer 6 Disc Touchscreen Deck
    - Nightmare Breed Motorsports custom tune
    - Custom 3" dual exhaust through x-pipe dumped at axle
    - Airaid CAI
    - Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
    "Kristine" - 1991 Nissan 240sx
    - Cut to pieces, LS build pending

  9. #9

    Default

    sounds to me like you might wanna trade out for a diesel. Or, get a truck with a 8.1. if i had to pick, id get the 6.2 and leave it alone, tearing into that 5.3 is going to effect long term reliability.

    Alex


    2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino

    Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers

  10. #10

    Default

    There's so many things you can do to the 327 i'd keep it build off of it and keep the originality, you'll appreciate it much more and so won't your kids. That's a hell of a father right there man thumbs up and good luck with whatever choices you make with the truck!


    2003 GMC Sierra 1500 SLE 5.3
    Factory Tint
    Recon Taillights
    2.5 ReadyLift Leveling Kit
    Low Profile Toolbox
    Westin Nerf Steps

Page 1 of 2 12 LastLast

Similar Threads

  1. Headlight upgrade
    By Pikey in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 19
    Last Post: 11-24-2011, 07:18 PM
  2. Considering an upgrade
    By bacol14 in forum Lifted & Offroad Suspension
    Replies: 0
    Last Post: 08-29-2010, 01:50 PM
  3. My first upgrade!!!
    By '10-Silverado in forum The Coffee Shop ~ Chit Chat
    Replies: 6
    Last Post: 03-22-2010, 11:07 AM
  4. looking to upgrade, don't know what! '05 sub
    By whymeintrouble in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last Post: 12-28-2009, 02:42 AM
  5. New here and looking to upgrade my 3.5L!
    By cliff-1972 in forum Chevy Colorado Forum (GMC Canyon)
    Replies: 5
    Last Post: 07-13-2007, 05:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •