GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default 2001 Silverado Fuel Pump access panel cut-out location in truck bed

    Hey Guys, had to change the fuel pump on my 01 Silverado ext cab wed., 1st time my truck stranded me on the highway. 138,000 miles...it was due, but 16 gallons of fuel in the tank, no floor jack and being 125 miles from the house made it a PITA! I'm gonna cut an access panel in the bed directly over the pump to ensure the next time it goes out it will be a 1 hour hour job or less, not 5.5! Anyone done this and have measurements of the panel cut-out size and location in the bed? I can/will wing it and get close, but if someone out there has the exact location and size, it'll be a much neater job.
    Thanks, Jamie
    Last edited by mainiac1; 04-01-2012 at 09:23 AM.

  2. #2

    Default

    Good idea! Way back when they used to have a door in the bed for access to the tank sender. At the cost of fuel pump replacement you would think they would have kept putting one in!

  3. #3

    Default

    Yeah, you'd think Chevrolet would be smart enough to use large enough gage wire and connectors so you wouldn't have to splice in a new connector pig-tail when you change your fuel pump the first time! I read something about the AC harness has the same issues only worse! Trying to save a dime at the owner's expense down the road! I figured out wher to cut the hole. Will post pics and dimensions when I cut out the panel.

  4. #4
    Legend

    Join Date
    Feb 2008
    Location
    Red Wing, Minnesota, United States
    Posts
    3,389

    Default

    check for them on youtube, there are videos and the guys speak of the right places to cut
    99 K1500 Suburban LT "THE BEAST"
    Hypertech III, K&N, true dual
    285/75/16
    ___________________________
    Jason

Similar Threads

  1. Cutting an access panel to replace fuel pump.
    By Scott77 in forum How-to Guides
    Replies: 14
    Last: 01-13-2013, 11:45 AM
  2. Another Fuel Pump Access/Repair
    By dueshebag in forum Member Introductions
    Replies: 2
    Last: 10-07-2011, 02:47 PM
  3. Suburban 2008/ Fuel pump location ???
    By vital'ka in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 2
    Last: 08-09-2010, 03:37 AM
  4. Cutting an access panel to replace fuel pump.
    By Scott77 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 5
    Last: 03-01-2010, 07:12 AM
  5. Fuel Pump Access
    By pelican in forum General Chevy & GM Tech Questions
    Replies: 6
    Last: 09-10-2008, 12:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •