Results 1 to 2 of 2
Thread: 93 K1500 HID light issue
01-19-2012, 05:27 PM #1
93 K1500 HID light issue
Installed HID's in High, and Low beams along with the Hi4 mod. Mounted the ballast's behind grille on the core support (for now using foam tape pads till i get screws) when i turn the lights on they all 4 work great, i drive to work and shut it off, after work i start it and turn them on and the passenger side low doesnt work, but the other 3 do. i shut it off, then a little while later turn them on and it works.
05 Silverado 1500 LS 5.3L.6" fabtech lift, 35x12.5 Nitto Mud Grapplers, 20x10 XD Monster wheels. MagnaFlow dual exhaust, AEM cold air intake, custom tune.
35W 5K HID low,fog, 55W highs, Hi-6 Mod, black tail lights.
Color matched front and rear bumper caps, fully debadged.
5% tint all around, 35% full windshield with 10" 5% brow.
7" pioneer touchscreen Double Din, 2 Rockford R1-12's under the seat with Rockford P300-1amp, Rockford prime speakers all around, LED interior Lights.
04-17-2012, 09:47 PM #2
Hi, my name is Wes, I work at Custom Truckk Parts in Edmonton and I see this problem frequently. Check your grounds and the HID wire harness fuse holder for continuity, if there is no problem there, try starting the truck with the park brake ON. It sounds weird but it has something to do with the voltage in the dash. When the HIDs fire, the voltage drops and one light will not stay on.
By 89k1500 in forum GM PowertrainReplies: 0Last Post: 10-24-2011, 06:52 PM
By brentlemaster in forum GM PowertrainReplies: 1Last Post: 05-16-2011, 04:38 PM
By silverlion in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 5Last Post: 04-04-2011, 03:00 PM
By cover3 in forum GM PowertrainReplies: 18Last Post: 10-13-2009, 05:56 PM
By dsquared in forum Lifted & Offroad SuspensionReplies: 0Last Post: 07-13-2009, 08:24 AM