Results 1 to 6 of 6
04-09-2012, 09:29 PM #1
04 trailblazer has no forward or reverse
My brother in law just recently bought an 04 trailblazer with about 172k on it. It has the 4.2 v6 but no sure bout the trans.
He was driving down the road when his tach revved up and he noticed he had no gears. I looked at it for him. Noticed it had way too much fluid, maybe it smelled a touch toasted. But not burnt by any means. His torque converter is spinning at least from the outside. No matter what gear you put it in the engine does not load up or otherwise give any indication that it is trying to go in gear.
A quick scan showed no codes. I did verify that the TCC slip is identical to the engine rpm. Maybe broken input shaft, sprag, torque converter? Any ideas?
04-25-2012, 10:25 AM #2
I'd imagine the sprag is the culprit for the initial issues. That being said, I'd say all the forward apply clutches and stills need to be replaced, along with an upgraded sun shell and all the other doo doo parts that usually go
04-25-2012, 11:17 AM #3
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
A broken sprag would not stop reverse from engaging. It certainly CAN end all forward motion. What is the history of the vehicle? Has it been used to tow? If so, how much weight and how frequently? Has it given any other warning signs like noises, slipping, shuddering. Has it set the check engine light? If so, what are the codes? It may be a torque converter problem. The Torque Converter is what takes the place of a clutch on an automatic transmission. If it has no pressure, insufficient pressure or insufficient fluid inside it, it will not engage the engine to the transmission. This may be why you have too much transmission fluid. There may be none getting into the torque converter, which could be a bad valve in the transmission. Sign of a broken sprag: If your transmission slips between the shift from 2nd to 3rd gears.
BTW: the Trailblazer did not come with an available V6. It is an inline 6.
Need... more... input!"It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
04-26-2012, 11:28 PM #4
Did you check to make sure that the driveshaft is not spinning? Might not be a trans issue at all could be the rear end. Another post thought he had a trans issue and it ended up being the rear end.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
05-08-2012, 08:58 PM #5
- Join Date
- Mar 2010
On our 04 I thought we had a transmission problem too, but it turned out to be a problem with the instrument cluster motors. Seemed pretty weird to me that it would have such a strong affect on the transmission. We had to have the entire cluster panel replaced and it fixed the problem.
06-27-2012, 10:23 PM #6Originally Posted by moogvo
The problem turned out to be the front pump. It pretty much exploded. We just had the entire trans rebuilt.
By gordone in forum GM PowertrainReplies: 1Last Post: 10-04-2011, 11:17 PM
By madgary in forum GM PowertrainReplies: 0Last Post: 10-18-2009, 01:19 PM
By farmboy in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 09-16-2009, 10:49 PM
By Crakums_GT in forum Member IntroductionsReplies: 10Last Post: 01-30-2009, 10:07 AM
By chevyman5.3L in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 10-21-2008, 04:45 PM