Results 11 to 20 of 94
05-28-2012, 09:52 PM #11
2004 GMC Sierra 1500 5.3L V8 4x4 SLT Extended Cab Long Bed
(Garage Link: http://www.gmtruckclub.com/forum/sho...MC-Sierra-1500)
NRA Certified Instructor, Range Safety Officer, & Benefactor Member
"I have sworn upon the altar of God eternal hostility against every form of tyranny over the mind of man." -- Thomas Jefferson
"The only difference between the topic police and the thought police ... is spelling." -- Anonymous
05-28-2012, 11:11 PM #12
Right now, anything is open and thank you for helping me today. Got the tires rotated and balanced and alinement done.
2000 Silverado 1500 Ext Cab, 2WD Vortec 5.3 | K/N Cold Air Intake | Monroe Sensa-Trac front shocks | Monroe Sensa-Trac load adjusting rear shocks | Built in Canada | OEM replacement Headlight casings |OEM replacement Tail light casings | Kenwood Excelon Head Unit | Focal Speakers | Dash Cam | 265/70R16 Michelin LTX M/S2 | Rebuilt Transmission |Bosch Platinum 4 plugs | 2nd replacement windshield | G80 | Silverstar Ultras | Dual Yellow Tops | Black Lights | Fog Machine | 1500W Power inverter | 400W AMP | BlueTooth 3.x for hands free dialing | HD Radio Tuner | Diablo InTune Tune :great:| 6000K HID Lowbeams | 6000K HID High beams|All interior lights are 6000k LED's|Blue LED's in my cluster pack|LED's in Third Brake Light |WeatherTech front digitally matched floor mats |"Big 3" Electrical Upgrade |
05-29-2012, 06:38 AM #13
Yeah I can probably do the 23rd. I guess I need to do something to my truck, I don't want to be the guy with no mods. LOL
2008 Chevy Silverado Ext. Cab 4x4 w/5.3L V8
4" Oval Nerf Bars
Kenwood DNX6180 Navigation System
Custom 4x4 Decals
05-29-2012, 06:57 AM #14
sounds like a plan to me, as far as i know i dont have anything that weekend.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic
Tow mirrors - Diablo InTune - Flowmaster Regular 40 - Ready Lift 2.5' lift - Carr Light Wing - TruckLite LED lights
05-29-2012, 08:32 AM #15
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
me too. I ned to get my catalytic converter issue sorted out, but I am hoping to have it taken care of by then. I put the truck up on ramps and went to take the down pipes off. When I put the wrench on the bolt and gave a pull, a nasty pain shot across my chest and neck. I actually thought the truck fell on me for a minute. After laying there for several minutes, I realized that the truck was still on the ramps just like it was supposed to be. I haven't been brave enough to try it again! LOL!"It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
05-29-2012, 09:09 AM #16
Ok what times are good for people? I'm thinking mid-day (1pm-ish EDT) so that people have time to be leisurely about getting up and driving. We could hang out for 4-5 hours then folks could head back with some daylight to spare.
Is that workable?
05-29-2012, 09:11 AM #17
That works great for me. Any ideas on where to hold it?
05-29-2012, 09:14 AM #18
Probably the RTP area. As it seems ot be the center of gravity and as we've got folks both north and south of it who are interested. I figure we'll pin down a date and time and get a precise location after.
05-29-2012, 09:18 AM #19
Oh yeah, that's more what I meant as in the general area. I'm looking forward to it. I'm planning to get my bowties wrapped soon, but not sure I'll have time for much else between now and then.
05-29-2012, 09:26 AM #20
We like factory as much as we like modded. There's no mod requirement to come.
By smabe in forum Member IntroductionsReplies: 13Last Post: 02-13-2012, 03:25 PM
By PantheraUncia in forum Member IntroductionsReplies: 9Last Post: 12-30-2011, 04:39 PM
By BlackedOut010 in forum Member IntroductionsReplies: 16Last Post: 04-23-2011, 10:03 AM
By jconn161 in forum Member IntroductionsReplies: 16Last Post: 03-17-2011, 12:19 AM
By lonnie.hausler in forum Member IntroductionsReplies: 5Last Post: 09-13-2010, 10:11 PM
Tags for this Thread