Results 1 to 10 of 10
Thread: torsion keys...good or bad?
04-23-2012, 08:51 PM #1
torsion keys...good or bad?
My stepfather and I were thinking about lifting our trucks a little was woundering if torsion keys are a good idea to lift the front. What I mean by this is replacing the stock ones with aftermarket ones
04-23-2012, 08:57 PM #2
There is no problems with doing this it's by far better than just cranking them up. Even if you do just crank the factory ones up it still wont hurt ive had mine up 2'' for a few years now and havent had any problems2000 Chevy Silverado 4WD Classic
2'' lift Torsion Keys and air shocks
33/12.50 Hankook Dynapro M/T
3 1/2'' down pipe back 6" Tip
Dodge Towing Mirrors
Smoked Tails, Cab Lights, and Side Marker Lights
1% Rear and Side Window, 20% Front Tint
American Racing Wheels/ With a custom black paint
Cold Air Intake
Edge Performance Chip
Custom Audio System
Black background headlights and parking lights
04-23-2012, 09:11 PM #3
May ride a bit rougher but there shouldn't be any problems.
If at first you don't succeed, get a bigger cheater bar.
1999 GMC Sierra SLT Z71 | 5.3 "Vortec" | Spectre "Cold Air Intake" | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tail Lights | Denali headlights | Grill Mounted Fog Lights | AWS Bug Shield | 265/70/16 Futura Scramblers | Boss HD Speakers | 2005 Overhead Console | Flowmaster Super 40 mufflers 2N1O | Mostly stock-ish
Bigger Amp Alternator | Electric Fans | Transmission Fluid cooler | Paint (Halfway there)| Interior Restoration/Upgrade with newer model parts | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations (68% Done) | And whatever is spurr of the moment
CVN-69 "IKE-ATRAZ" AIR/V-2 Gear Dawgs
04-23-2012, 09:22 PM #4
Well I found some springs for my truck that will raise the back 3 1/2"...we just wanted to know if the aftermarket keys would match the rear springs
---------- Post added at 10:22 PM ---------- Previous post was at 10:18 PM ----------
My stepfather was woundering how they worked...do you still crank the torsion bar or do the keys compensate so you don't have to touch them?
04-23-2012, 09:51 PM #5
Still crank them. The springs probably won't match the front height. May be too tall to be level if thats what your going for
---------- Post added at 09:51 PM ---------- Previous post was at 09:48 PM ----------
Only thing I wouldn't do is put springs on it. Makes the ride rough in the back. I'd put blocks between the springs and rear axle
04-23-2012, 09:58 PM #6
The keys just drop down the location of the torsion bars. They also have an adjuster bolt to raise & lower them. Most mechanics don't recommend cranking on the torsion bars, as it's hard on the alignment. I put keys on my '07 2500 HD & lifted it about 2", then aligned it. It wasn't off by much, but enough to wear your tires in time, especially if you don't rotate your tires. The keys will keep your ride comfort as stock, while cranking the bars will make it ride a bit harsher.
04-24-2012, 07:25 AM #7
So the keys lift the truck without cranking or so you still have to crank them?...I need new springs anyway I thought the lifting springs were a good deal...anyone on here have experience with the soft ride springs from skyjacker?...those were the one's I was thinking about getting
Last edited by GMCZ71; 04-24-2012 at 07:51 AM.
04-24-2012, 07:43 AM #8
- Join Date
- Mar 2012
- Regina Saskatchewan Canada
- Blog Entries
I will be setting the torsion bars today on the Lucky Penny this morning,,, the stock settings were off when we tore the truck down, the passage side was 1 cm less then the drivers side, I am not sure what that was all about , but did notice the truck was sitting unlevelled when it arrived to my shop.
I asked lucky if the truck pulled to the right and he said yes it wandered a little,,, if i get this mod set and do not like the way it sits, rides or handles, I will be suggesting that Lucky gets some keys for it,,, if available ... I have had some experience with these in an other truck of mine, and have found no negative effects......
04-24-2012, 08:37 AM #9
04-25-2012, 10:02 AM #10
I've loved mine ever since I put them in, looks great, and ride's smooth so i'm not complaining
2003 GMC Sierra 1500 SLE 5.3
2.5 ReadyLift Leveling Kit
Low Profile Toolbox
Westin Nerf Steps
By fala21 in forum Lifted & Offroad SuspensionReplies: 8Last: 02-10-2011, 11:40 PM
By jwco5.3 in forum Lifted & Offroad SuspensionReplies: 6Last: 09-28-2010, 12:12 PM
By devilsalmostfree in forum Lifted & Offroad SuspensionReplies: 0Last: 03-14-2010, 07:03 PM
By trailshredder in forum Lifted & Offroad SuspensionReplies: 2Last: 07-15-2009, 09:03 AM
By vncj96 in forum Lifted & Offroad SuspensionReplies: 6Last: 02-05-2008, 09:55 AM
Tags for this Thread