Results 1 to 10 of 17
Thread: Led light and load resister?
04-25-2012, 01:23 AM #1
Led light and load resister?
I recently installed some leds in my tail lights and back up lights to replace the old style bulbs in my 03 Avalanche. Someone told me that I may need a load resister to stop the hyper flash as he called it. I didnt know anything about the hyper flash problem or a load resister until now. If anyone knows.... what load resister do I need a 6 ohm 50 watt or something else? Also do I need one for all 6 of my tail lights (brake lights, turn signal and back up lights included in that count)? Or do I just need one for turn signal bulbs? I saw someone else on here had a cruise control problem with their leds but i didnt really understand their solution. I havent tried my cruise yet and I definatly dont want to start blowing fuses or messing anything up. Thanks for your help.
All I installed was new led bulbs not a led tail light assembly
---------- Post added at 02:23 AM ---------- Previous post was at 01:58 AM ----------
I also found a flasher module. Not sure if this would be a beter fix or if I could even use it in my truck.
Last edited by freddie; 04-25-2012 at 01:00 AM. Reason: left something out2003 Avalanche 4x4 with cladding 110k miles +, K&N stock replacement air filter, Skyjacker 8000 shocks, Hawks LTS pads, Summit Racing brand drilled and sloted rotors, Sylvania ZXE high & low beams, leveling kit, 285/70/r17 Michelin M/S
04-25-2012, 05:28 AM #2
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Radio Shack has a kit for this..08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks,Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop painted and on, PerryCraft Rack system with Kayak and Bike Holder, Tempress Boat Hatches.... New Bilstein shocks on the way... New Mods coming soon..... X
04-25-2012, 11:25 AM #3
Replace the turn signal flasher with one made for LEDs.
97 Chevrolet Suburban K1500 5.7L
78 GMC High Sierra K1500
Fat, drunk, and stupid is no way to go thru life.
04-25-2012, 11:30 AM #4
Most of the LED replacement bulb modules already have a resistor built in to them. Make sure you have "hyper flash" before adding in resistors or changing flashers. the reason you get "hyper flash" is that the LED appears to be an open circuit to the flasher, so it thinks you have a burned out bulb which is why you get rapid flashing... It is an alert to tell you that there is a bulb out.
Last edited by moogvo; 04-25-2012 at 11:32 AM."It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
04-25-2012, 11:46 AM #5
I have currently only replaced all the rear bulbs with leds. I am pretty sure its hyper flash because my blinker is noticeably fast. I just dont know whats the best option. If i replace the module before i replace the front bulbs will it hurt anything? Also what size resistor would i need if i go that route?
04-25-2012, 11:58 AM #6
04-25-2012, 12:19 PM #7
04-25-2012, 12:25 PM #8
04-25-2012, 12:32 PM #9
04-25-2012, 12:34 PM #10
By beckya99 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 0Last Post: 07-11-2011, 10:46 AM
By VallecitoSnowMan in forum General Chevy & GM TechReplies: 10Last Post: 05-20-2011, 09:47 PM
By bob13 in forum Games ForumReplies: 19Last Post: 05-01-2010, 02:59 PM
By scgamer_99 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last Post: 06-17-2009, 12:17 PM
By TrailLeadr in forum The Coffee ShopReplies: 2Last Post: 05-21-2007, 10:53 AM
Tags for this Thread