Results 1 to 10 of 22
Thread: Hydro Graphics Dash
05-01-2012, 12:35 AM #1
Hydro Graphics Dash
Just wanted to share a recent project. Its a dash out of a 2011 Jeep. I also have a member here who is sending me the front and rear bowties today to be dipped. I will post picks of those as well once they are complete.
The dash is done in one skull pattern. We are using this dash in a display at a local car audio shop. To show the different effects we did half the dash in a red candy and the other half we cleared normal.
The bowties we will be doing will be color matched to the truck with another skull pattern the member chose. The truck is Metallic Stealth grey which will be the base coat with this pattern over it.
05-01-2012, 12:55 AM #2
Wow, that looks really nice. I'm really curious to see how the bowties turn out. How's the longevity on that stuff and how do you protect things like the dash? I could see this as a relatively affordable way to upgrade the look of the whole interior.
To Be Completed (Eventually):
6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp
05-01-2012, 01:24 AM #3
Interior parts that are dipped should retain the finish for years - they arent subjected to the sun as much if at all.
Exterior parts you can expect to last as long as your paint on your vehicle generally - I know guys here in Arizona with dipped spoilers that have had them for 5 years and the look like they did they put them on. I guess your mileage will vary depending what elements its subjected to.
The clear we use has a UV protection.
This is a bow riser that we dipped - the owner has another bow that was dipped 7 years ago and he said the finish is as good as the day he brought it home.
The pattern is Predator Brown Decpetion
05-01-2012, 01:26 AM #4
Thanks for the info. As I'm sure is understandable, I'm always a bit hesitant with doing something to my truck that I'm unsure of. Dipping is quickly becoming a front runner for some accessories though. The hardest part will be figuring out the design.
05-01-2012, 01:42 AM #5
I will tell you that the ink from the film etches to the paint - it takes some elbow grease to get the pattern off to repaint!
When people are unsure I suggest doing a couple trim parts off the door etc...just to get a taste
05-01-2012, 01:46 AM #6
And that's exactly what I'm planning to do. I'll start with something small and easy to replace if I don't like it for some reason. I doubt that will be the case, but better safe than sorry. Plus I want a single theme for the interior so that will give me a good idea of the overall result.
05-01-2012, 02:04 AM #7
Looks really nice, if you guys had a royal purple or dark purple burlwood or carbon fiber I would definitely give it a shot on my interior.
2012 Silverado 1500 LS Crew Cab 4.8L 4x4
- Falken Rocky Mountain ATS 265/70R17, Line-X bed liner, Black Bowties, Stampede front deflector, DeeZee black diamond plate bed rails, TonnoPro Lo-roll cover, Antenna deleted, Spyder Projection Headlights with Phillips CrystalVision Ultra bulbs, Spyder Tail Lights & 3rd Brake Light, Rough Country leveling kit, PlastiDip'd emblems, and wheel hubs, Diablosport Trinity, 20% tint
Next Planned Mods:
Black OEM grill
"Coming through in a new Chevy, droppin' game like it's too heavy."
05-01-2012, 02:24 AM #8
That looks great! I really like the idea of hydrodipping things. I would send my dash bezel and console trim your way to do the carbon fibre film like the GFX trucks had, but I sanded the texture off of the bezel in my last truck and I don't have the motivation or time to smooth another one.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
05-01-2012, 12:32 PM #9
That looks sweet man. Can't wait to see it installed.Please Tell Your Boobs To Quit Staring At My Eyes
05-01-2012, 02:53 PM #10
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
Makes me want to send you my whole dash shell!"It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
By sstoner911 in forum Contests & GiveawaysReplies: 52Last Post: 03-21-2012, 11:51 PM
By sstoner911 in forum Chevy Truck AccessoriesReplies: 5Last Post: 08-02-2011, 12:06 AM
By Brumby in forum Chevy Truck AccessoriesReplies: 22Last Post: 05-03-2010, 05:46 AM
By Swatchvy in forum General ClassifiedsReplies: 1Last Post: 03-24-2009, 05:48 PM
By Cableguy in forum Chevy Trailblazer Forum (GMC Envoy)Replies: 2Last Post: 04-13-2007, 09:45 PM