Results 11 to 20 of 23
Thread: Bilstein 5100's on 2wd Z71
05-07-2012, 01:21 PM #11
Coil-over shocks, on the other hand, CAN give you a minimal amount of lift because part of the assembly is a coil spring. It works on some level as a helper spring. They work well on vehicles where there is spring wear and weakening of the springs, but not as a replacement of the springs. The very nature of the name of the part in question "Shock Absorber" is descriptive enough to tell you what it's function is: to absorb impacts of uneven surfaces that you encounter while driving... to Absorb Shock... It is not a lift kit."It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery HERE.
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
05-07-2012, 02:55 PM #12
05-07-2012, 03:06 PM #13
05-07-2012, 04:19 PM #14
I understand where you are coming from @SurrealOne and @moogvo but I have to disagree. The shocks that the OP got are ride height adjustable. Before I got the ones I purchased I looked into the Bilsteins. The reason I didn't go with them is because of the part that does the "lifting". It seemed like a weak point to me. However it will raise the height of the front of the vehicle. Rancho also make a form of a "lift" shock. The shock itself as stated before does not actually lift the truck. The lift comes from the position of the spring on the body of the shock.
05-07-2012, 04:24 PM #15
05-07-2012, 04:37 PM #16
The "sag" i would worry about is in the spring. The issue the OP has is that he doesn't/didn't have a spring compressor that is small enough to compress the spring enough to move the spring up the shock body. I had a similar issue when I was helping a family member to replace the shocks on his mini cooper. I am always a little uneasy when it comes to disassembly of shocks/springs. There is a lot of energy in those springs.
05-07-2012, 06:07 PM #17
I get it that some shocks have coil springs on them. These are not designed to REPLACE original springs, they can help with ride stiffness and maybe even compensate for a partially collapsed spring. They can help you level your vehicle out but they are not intended to be a lift.
If they worked that way, people wouldn't spend thousands in money and time to buy lift kits, they would just force oversized shocks under their trucks and then dial them all the way up. you would be better off to cram a block of wood into the springs.
Last edited by moogvo; 05-07-2012 at 06:15 PM.
05-07-2012, 08:15 PM #18
- Join Date
- Apr 2012
This guy is talking about 5100 Bilsteins on his truck. His signature has me thrown........he has a Z71 2wd? All Z71's are 4x4 with an off road package. Is it possible that he really does have a 2wd and has the wrong part for his truck?
05-07-2012, 08:28 PM #19
If I'm not mistaken they changed that with the NNBS. I seem to recall reading somewhere that NNBS trucks had a Z71 option for 2WD trucks that included the decals and skid plates ... and that NNBS trucks that were Z71's and 4WD would say "Z71 Offroad" or "Z71 4x4"...
05-07-2012, 08:35 PM #20
- Join Date
- Apr 2012
I looked on the net and cant find anything but 4x4's listed as NBS models. Most are 2500's and the 1500's are all 4x4's. Maybe Im wrong.....I been known to be wrong once or twice in my life.......LOL!
By Rockstarrchevy81 in forum Lifted & Offroad SuspensionReplies: 4Last: 08-21-2011, 10:56 AM
By slimcubby in forum Chevy Silverado Forum (GMC Sierra)Replies: 14Last: 12-18-2010, 04:07 PM
By 1flyfisher in forum Lifted & Offroad SuspensionReplies: 6Last: 11-15-2010, 09:22 PM
By DarkCherry in forum Chevy Silverado Forum (GMC Sierra)Replies: 16Last: 11-09-2010, 10:12 PM
By devilsalmostfree in forum Lifted & Offroad SuspensionReplies: 3Last: 02-27-2010, 07:36 AM
Tags for this Thread