Results 11 to 20 of 26
Thread: How To Replace Front Disc Brakes
05-09-2012, 02:13 AM #11
This is a good addition to the How-To section. Props to you, Pikey.
05-09-2012, 10:39 PM #12
I did the job but I now have a woonle worse when I drive faster
05-12-2012, 03:56 PM #13
Sorry for the typing errors,(I must learn one day) I meant wobble and Pikey was right I forgot a washer on the rotor and it's all good. Pikey's pic's and step by step made all the diff and the job possible. Thanks
06-06-2012, 04:03 PM #14
Nicely done. is there a link to your previous thread (looking could not find). I need to replace front and read pads + rotors
are the rears much different? (E-brake issues ...)
thanks1995 Saturn Sw1 196K and counting
2001 Suburban LS 150K and counting
2004 MR2 Spyder 62K and counting
2007 mini cooper S 60K and counting
06-06-2012, 10:40 PM #15
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
06-07-2012, 10:04 AM #16
Ok, I am doing my brakes right now and found some issues and inconsistencies with my how to, So here is the revised version
Thanks for the clarification I have 4 wheel disks on the truck but figured like most cars they would have a different configuration. Looks simple compared to my Mini just way way bigger Thank you for the tips here greatly appreciated. Will start with the fronts (I can feel the warp when brakes are applied) so I am hoping that solves my issues. if not its off the rear of the car
PS I have a 2001 suburban LS (1500) assuming the brake will be similar identical
Found this on you tube looks a little too easy
Last edited by T-bone; 06-07-2012 at 10:09 AM.
06-07-2012, 05:21 PM #17
Nope, it is that easy. I did not see anything about cleaning and lubing the pins
06-18-2012, 04:20 PM #18
one more questions if you do not mind
1) did you use loctite (red) on reinstalling the caliper mounting bolts?
(read this on the auto zone site and found this for other references)
Last edited by T-bone; 06-18-2012 at 04:30 PM.
06-18-2012, 04:36 PM #19
The torques heads are a T55 size. I would never put red loctite on anything that I wanted to get apart again. If you insist on using it only use the blue. Red requires heat to get apart.
Last edited by Pikey; 06-19-2012 at 07:26 AM.
06-18-2012, 04:49 PM #20
By Scooter in forum Lifted & Offroad SuspensionReplies: 1Last: 01-15-2011, 07:55 PM
By tlavergne in forum Lifted & Offroad SuspensionReplies: 2Last: 08-27-2010, 07:13 AM
By silvercat19 in forum Lifted & Offroad SuspensionReplies: 4Last: 03-30-2010, 10:47 AM
By ranbrody in forum Chevy C/K Truck ForumReplies: 2Last: 08-24-2009, 10:50 PM
By f9108 in forum Lifted & Offroad SuspensionReplies: 1Last: 12-30-2007, 07:01 PM