Results 1 to 10 of 16
05-11-2012, 04:31 AM #1
Gen2 Prototype of Custom LED Projector Headlights
I got sick of looking for headlights for my NBS truck, as the ones for sale that I liked the looks of were junk that had functional problems (useless high beams) ... and the ones that were functional (OEM) had no real curb appeal, to me. @pmf608 suggested I crack my headlights open to remove the amber reflector, myself, as he knows I don't like amber on my truck. He also suggested I look into Yukon Denali headlights, as I wanted functional halogen projectors AND functional high beams. That got me going...
My first lesson was to learn to crack open and reseal my OEM's. There are write-ups on the Internet for how to do it, already, so I won't get into it. (The one I found to be the best is here: http://www.truckmodcentral.com/forum...ead.php?t=4286, and it has links to photographs, too.) This is slow and time-consuming and, thus, an endeavor truly for those who have patience for details; one slip can scratch the lens, the chrome, or both.
My second lesson in this was to crack open a pair of Yukon Denali headlights. These were much tougher to work with. They are heavier (which tires the hands/arms when working with a headlight for 8 hours, straight) and the sealant/adhesive on them is MUCH stronger. The Yukon Denali lights took me 3x as long as my OEM Sierra lights ... simply due to the sealant/adhesvie being different.
My third lesson was to play with LED placement to find what I might want. I'd never done LED strips, before, so I headed over to ijdmtoy.com and ordered up a set of pre-made strips. I specifically bought the Audi A5 R8 Style Xenon White Side Glow 20" 21-SMD Flexible LED Strip Lights (link: http://store.ijdmtoy.com/Audi-Style-...trip_sku59.htm). These ended up being VERY blue despite confirmation that I had received the white ones. They were not the brightest LEDs I've encountered, the adhesive on them was so-so, and the stranded wires were 22ga garbage that my dead grandmother could tear apart with her bare hands, God rest her soul. The black background was an issue, too, as the strips called far too much attention to themselves in the headlight due to the black strip colour. Still, I installed them as a Gen1 prototype to get a feel for the work. Ultimately I was so unhappy with the lights AND with the results that I disconnected the lights and left them that way ... and also avoided photos out of embarrassment.
My fourth lesson was in LEDs, themselves. I found a place through which I could custom order them from China. I wanted to buy American but I couldn't find what I wanted that was Made In The USA ... so out to China I went via ledlightsworld.com, which was quick to answer questions, knowledgeable, and very professional. They're clearly operating in a far eastern time zone, so responses were slower than a local vendor might have been, but because it was due to the time zone difference I didn't mind, at all, as I'd ask a question one day and wake up to the response the next. From ledlightsworld.com I spec'd a 16.4 foot roll of Side View Flexible SMD335 LEDs in "Pure White" (5500-6500K) on a white background with waterproof surface injection (IP65) gel. Here's the link to the LEDs and the options for them: http://www.ledlightsworld.com/side-v...eds-p-131.html. The LEDs arrived much faster than I expected. If you order from them make sure you keep your package weight under 1kg and also select the full disclosure option for customs, as both will help speed things along.
My fifth and final lesson was on a new Gen2 prototype ... based on lessons learned from the Gen1. For the Gen1's I had mounted the LEDs upside down to the headlight lens, itself, as it allowed me to use silicon adhesive without worry for the chrome AND it guaranteed me clearance when replacing the lens. In hindsight this was poorly thought out, as it caused reflections in the chrome, looked hideous, and would eventually result in loose, sagging, and/or waving LED strips within the headlight, as gravity is a force that never sleeps and all adhesives eventually fail. So, this time the strips were to be applied directly to the chrome and tested for look before sealing them up.
Here are some pics of the prototyping and finalization.
In this pic: Custom-made Gen2 right and left (note red/black wire positions) LED strips
In this pic: Gen2 prototype right LED temporarily attached to right (driver's) headlight for fitment
In this pic: Gen2 prototype lens placed on assembly for fitment
In this pic: Gen2 prototype LED leads exiting a pre-existing vapor port (for convenience) connected to test power
In this pic: Gen2 prototype front view with test power
In this pic: Gen2 prototype side view (wire exiting pre-existing vapor port, for convenience)
In this pic: Gen2 finished product side view (unlit)
In this pic: Gen2 finished product front view (unlit)
In this pic: Gen2 finished product front view (lit)
In this pic: Gen2 finished product weatherproof quick disconnect wiring (red terminals)
I have already modified my truck wiring to provide quick disconnect points that are tied to my DRL's. A diode adjustment for my DRLs renders them on any time I am driving (day or night). Weather permitting, the Gen2's will be installed this weekend and I'll take some photographs while I conduct a bulb review.
Last edited by SurrealOne; 05-11-2012 at 09:13 AM.
05-11-2012, 04:41 AM #2
Looks awesome. That's a lot of work, but you now officially have custom and unique headlights. That looks like a fun project. I almost called it a fun "little" project, but it's not really so little.
To Be Completed (Eventually):
6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp
05-11-2012, 04:53 AM #3
05-11-2012, 05:29 AM #4
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Look'in good.. It is alot of work But in the end if you like what you see it will all be worth it.... Thanks for the Write up....
05-11-2012, 12:24 PM #5
Looks really nice. I am looking at putting in denali headlights on my yukon. Do the Denali lights really throw that much more light?
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
05-11-2012, 01:07 PM #6
Looks good! Now, lets see some pictures of them mounted onto your truck... that's the real test.
2008 FORD F350. My new all-around truck.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread. - Crashed. Will be rebuilt soon.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck -- FOR SALE
05-11-2012, 01:25 PM #7
05-11-2012, 04:06 PM #8
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
Awesome write up Surreal. Thanks for sharing this."It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery HERE.
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
05-11-2012, 05:09 PM #9
great write up. I like the yukon upgrade and LED'sDavid
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2001 Pontiac Sunfire
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
05-12-2012, 09:44 PM #10
The weather was cooperative, today, so I swapped out the Gen1's for the Gen2's and am pleased with the results. I think the nose of my truck is finally done. (Yay!)
In This Pic: Gen2 driver's side finished product (night view)
In This Pic: Gen2 passenger side finished product (night view)
In This Pic: Truck front (day view w/ all lights on)
In This Pic: Gen2 finished product 's installed Truck Front - May 12, 2012 (day view)
By MTM in forum General Chevy & GM Tech QuestionsReplies: 9Last: 02-05-2012, 11:17 PM
By reggiecab2000 in forum Chevy Truck AccessoriesReplies: 11Last: 10-19-2010, 01:27 AM
By RedneckTrucker in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last: 07-19-2010, 12:33 PM
By RedneckTrucker in forum Chevy Truck AccessoriesReplies: 10Last: 01-04-2010, 10:06 AM
By firstname.lastname@example.org in forum Chevy Truck AccessoriesReplies: 5Last: 04-12-2009, 10:27 PM
Tags for this Thread