Results 1 to 3 of 3
05-15-2012, 12:35 PM #1
2003 Yukon XL Pitman arm Nut size
Does anyone know what size socket I will need to take the nut off of the gearbox so I can remove my pitman arm? It is a 2003 Yukon XL 1500 4x4. I don't want to start the job and not have a large enough socket. I think that @Coach24 just did one, maybe a few of you remeber what size it is. Thank you.
Last edited by Pikey; 05-15-2012 at 12:48 PM.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
05-15-2012, 05:50 PM #2
Been a looooooooong time since I did one. I thought it was a 23 mm or something like that. Can't say for 100%Please Tell Your Boobs To Quit Staring At My Eyes
05-15-2012, 07:54 PM #3
1-5/16". Use a impact socket, and use it with the Pittman Arm puller on your air wrench.
2004 Chevrolet Silverado 1500; 4x4; Ext. Cab; 5.3L FI
By parts bot in forum Chevy Parts eBayReplies: 0Last: 11-18-2011, 10:10 AM
By ChevyFan in forum Chevy Parts eBayReplies: 0Last: 08-22-2010, 10:40 AM
By ChevyFan in forum Chevy Parts eBayReplies: 0Last: 08-02-2010, 12:10 PM
By ChevyFan in forum Chevy Parts eBayReplies: 0Last: 04-14-2010, 06:50 PM
By ChevyFan in forum Chevy Parts eBayReplies: 0Last: 02-26-2010, 10:40 AM
Tags for this Thread