Results 1 to 8 of 8
Thread: Using a Power washer?
05-17-2012, 08:15 AM #1
Using a Power washer?
I am getting a 2700psi Honda motor power washer. Years ago I used to power wash houses and decks, so I am not new at using them. My question is how bad will it be to power wash my truck? It has the soap tube as well. Obviously I would user the widest tip and keep a distance. What do you think?Tim Walters (Curky)
Wrangler AT/S 265/70R17 - Trail-FX window vents - Husky fitted splash guards - Silver Star zXe - Leveling kit -
05-17-2012, 08:24 AM #2
Most drive in car washes have pressure washers for use, I would be careful about direct pressure on paint but should be fine on under carriage, tires, most wheels and bumpers. I personally go to Russell Speeders carwash and for $16 I have about 15 workers, all very friendly and professional hand wash, dry, vacuum, windows and dress the tires. If I were to do this at home i would spend a good hour at least so worth the money and done in 15 minutes usually
2011 GMC Sierra 2500HD SLE 4WD/Z71 Crew Cab Gray Green Metallic 6.0 Gas 6spd Auto 3.73 gears, HD locking rear differential. 18"Alum Wheels (Stock) Stock Michelin LTX AT-II Tires, Banks Monster Exhaust, Westin Platinum SS Oval Step Bars, EGR Window Deflectors, Extang Trifecta Tonneau, Front and back Weathertech Digitech liners. Factory Remote Start with Onstar App on iPhone.
2003 GMC Envoy SLE Black 4WD 4.2 175,000 Miles all original drivetrain and runs like a champ and no rust or rot!
05-17-2012, 10:10 AM #3
- Join Date
- Dec 2004
- Arlington, Texas, United States
- Blog Entries
I damaged the custom paint on my '62 years ago with a power sprayer. It's fine for new paint, but if you get a rock chip on there, the water pressure will get underneath and make the paint chip off if you have pressure that's too high. There's a difference between a car wash sprayer and a deck sprayer I think.
10 Chevy Traverse LT AWD
02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
99 Chevy Cavalier LS (105K+ miles - commuter car)
78 Chevy Suburban Silverado (454, 3/4 ton)
62 GMC 3/4 ton Pickup (350 police interceptor)
Remember: Search Before Posting | Fill out Your Profile & Signature
Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
Support GMTC: Help the site, contribute today
05-17-2012, 10:15 AM #4
I would be careful. Use the widest tip you have and dial down the pressure. Most people just run them on full pressure and never turn the knob to lower the pressure. Like Steve said it will peel the paint around a chip. I was a bricklayer and we used one like that. Occasionally we would have to spray off a car that we got dirty. I have seen guys blow the glass right off the side view mirrors.
Last edited by Pikey; 05-17-2012 at 10:19 AM.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
05-17-2012, 10:44 AM #5
I did some research. A car wash power washer uses 1000psi -1200psi. What I have found out is that people use the 40 degree tip and the soap tip with no problems. I will buy the adjustable tip for $12.00 and they have something that makes pressure adjustable for $20. I can’t pass up a free brand new power washer. All I have to do is pressure wash his house, deck and stain his deck. Then I can make a couple extra bucks from the neighbors. That is the mane reason for getting it. I was hoping to just get a plus.
Thank You everyone!
Nice to get options on things, so you can keep them Coming.
05-17-2012, 11:07 AM #6
"It went together didn't it? Well then there has to be a way to take it apart!" - Me.
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
05-24-2012, 09:41 PM #7
- Join Date
- Jun 2010
- Abingdon, MD
I have an excel 2000 psi pressure washer. I use a wide fan spray to wash my 2010 Silverado (one of the nozzles you can buy color coded-I think it is yellow). I like it as it gets the dirt out of the door jams, hood-fender clearence etc. I stay about 1-2 ft away with the nozzle and it does great. I used it on my 1996 Saturn for years, and after 16 yrs, the paint looked new.
05-25-2012, 08:08 AM #8
I did use it. It was fine. I stayed away. I did get all the dirt and salt from underneath. I still had to wash by hand; it left a lot of spots. I did get all the tar off from all the darn road work going on. I will use it to get the hard stuff off. Thank you everyone.
By purplehaze in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 13Last Post: 08-14-2011, 09:20 AM
By flamecop in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last Post: 12-13-2010, 07:23 PM
By mrcaddy in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 7Last Post: 07-20-2009, 10:19 PM
By truck3 in forum Chevy Silverado Forum (GMC Sierra)Replies: 6Last Post: 03-12-2009, 06:13 PM
By CarpenterGuy in forum The Coffee Shop ~ Chit ChatReplies: 8Last Post: 12-06-2008, 12:28 AM