Results 1 to 10 of 12
Thread: Cleaning running boards
05-17-2012, 02:46 PM #1
Cleaning running boards
I wash and wax my truck, dress the tires, clean all the glass. But, the running boards never look clean. I get all the dirt off of them, but they don't shine. I have used tire foam on them. They look awesome after that. I don't use the boards but my wife and kids do. They complain because they are slippery as heck after I foam them. Any ideas on what I can use to make them shine but not slippery.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
05-17-2012, 06:05 PM #2
- Join Date
- Apr 2011
05-19-2012, 07:34 PM #3
Turtle Wax total Interior Care Detailer. I use it on all exterior plastics including the plastic for the running board steps and end caps. It makes it clean looking but not glossy which means it's not as slippery.
04-10-2013, 12:14 PM #4
I just came across this post again today. First, I ended up using the turtle wax extreme shield wax on the running boards. It made them shine and it was not slippery. Second, looking at the pictures of my truck sure makes me miss that color and how well it shined. No matter what I do to my new truck the silver birch paint just does note have the mirror effect that this one did.
04-10-2013, 12:24 PM #5
04-10-2013, 12:26 PM #6
04-10-2013, 12:37 PM #7
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
08-18-2013, 10:16 PM #8
- Join Date
- Jun 2013
- 1391 N Jefferson St., Anaheim CA 92807
Adams Butter Wax do great job for cleansing. Goes on easy and comes off easy and leaves a great shine.Quick Clean, Adam's Detail Spray truly best for Waterless Car Wash and Quick Spray are also good to achieve the best shine and best looking paint, well it is a process. Wash, clay bar, polish, then wax.
08-19-2013, 07:42 AM #9
08-19-2013, 12:04 PM #10
I will second the Chemical Guys Black on Black!! I use that on all plastics! Really brings back the shine as well as cleans up all that plastic found under our hoods too!Objects in mirror are losing
2003 Chevy Silverado Z71, 5.3L, K&N 57 series, 2.5'' Flowmaster Super 10 series dual exhaust , Corvette Servo, McNew Automotive Dyno tune, SS gauge cluster, Extang Trifecta Tonneau, Pacesetter shorty headers, Goodmark cowl hood, Sony Xplod speakers, Kenwood DDX-470 exhaust tips, 16" Ultra Badlands polished wheels, Pirelli Scorpion ATR .
By mwolfe25 in forum Chevy Truck AccessoriesReplies: 0Last Post: 07-09-2010, 12:34 PM
By BluBurb89 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 9Last Post: 04-23-2010, 01:15 AM
By sierra818 in forum Chevy Silverado Forum (GMC Sierra)Replies: 2Last Post: 04-29-2007, 05:33 PM
By Steve in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 2Last Post: 02-25-2006, 11:38 PM
By CkVin in forum Chevy Trailblazer Forum (GMC Envoy)Replies: 1Last Post: 04-24-2005, 04:44 AM
Tags for this Thread