Results 1 to 4 of 4
05-20-2012, 03:49 PM #1
2011 Silverado headlight lens removal
Has only tried this on a nnbs headlight? Im thinking about trying the oven way later this week. If anyone have done this do you have a how to? i can only find them on nbs and obs styles.
Thanks2011 Silverado 1500 Z71 4x4 Crew Cab
LED Dome light
LED Floor lights
RC Leveling kit
Tow Mirrors Custom LED running/signal lights
BakFlip G2 Tonneau Cover
05-20-2012, 04:02 PM #2
This is fairly easy to do however you have to remove the grille and the grille clips can be a pain. there is a 10mm bolt down low that is reachable through the wheel-well. Then I think there are two top bolts to remove.
The following video should be able to guide you through the process.
---------- Post added at 04:02 PM ---------- Previous post was at 03:56 PM ----------
re-reading the post/thread title, I don't think I answered your question. You are obviously asking about the lens and not headlight removal from the truck, sorry about that.
05-20-2012, 04:23 PM #3
LOL its ok, I took it apart the other night to see what i was getting into. But yes im trying to remove the amber lens in the actual headlight
05-20-2012, 05:52 PM #4
Based on experience with the NBS headlights, I don't recommend the oven method. I've personally found it just makes the plastic warm and annoying to handle ... for what little it helps with the adhesive. Now a heat gun is a different story and I do use one of those while working the material in localized areas.
By Rymanh24 in forum Audio, Video & Gadget TechReplies: 3Last Post: 08-04-2011, 04:35 AM
By sstoner911 in forum Chevy Truck AccessoriesReplies: 0Last Post: 05-13-2011, 11:34 PM
By Sandhopper in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 08-08-2010, 08:27 PM
By rwmoorh in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last Post: 10-30-2008, 10:44 AM
By randyb2004 in forum Chevy Truck AccessoriesReplies: 3Last Post: 11-18-2007, 02:15 AM