Results 1 to 3 of 3
Thread: LED Puddle Lights
05-21-2012, 01:42 PM #1
LED Puddle Lights
I've seen several places advertise the Philips LED fog light kit, I'm thinking about re-purpose them and install them underneath the sides of the truck and possibly behind the tailgate so when I open the door or turn on the cargo light they would light up the ground around me.
What would be the difficulty of this (For a easily frustrated novice)2012 Chevy Silverado Z71 4x4 5.3
Rough Country 2.5' Lift/Level
Chevy 18's on Toyo Open Country MT 33's
Debating on DiabloSport Tuner with Custom Tune from Lew
Debating on AMP Research Powersteps (I know, I got allot of thinking to do heh)
2008 GMC Sierra WT 4x2 4.3
3" Rough Country Suspension Lift w/Control Arms
Super 44 Flowmaster Straight Dual Exhaust from the Cat Back with 18" Chrome 3.5" Exhaust Tips.
Moto Wheels 951 18" on Nitto Mud Grappler 33's
Infinity Kappa Perfect 6.1 System with Kenwood 5.1 amp using Stock Headunit.
05-22-2012, 09:25 AM #2
Maybe I should ask a audio tech that knows how to add to existing wiring.....
05-22-2012, 11:34 AM #3
I held off from responding because while it's not hard to do what you'd like to do ... it requires some fabrication (for mounts), some easy-but-detailed wiring (including wire sizing, relay placement, ground placement, fuse placement) and wire protection (to properly protect what's outside the truck), and some analysis on where to tap into existing wiring to tie the lights on/off into your courtesy lights.
None of that is hard, individually. However, the term 'skill stacking' applies, here ... which is term applicable to the difficulty of something based on the aggregate total number of skills required to accomplish a given task. In this case there are at least four distinct things that need to be done (with knowledge of far more), and I don't see the combination of them as something appropriate for "an easily frustrated novice" as you put it. Undersized wiring, improperly protected wiring, lack of/improperly placed/improperly sized fuses/relays, mounts that place the lights where rocks and other debris might crack/shatter the lenses or immerse them in mud/water/etc. are all concerns for a project like this.
In total, I don't see it as a novice activity unless the novice is VERY detailed-oriented and very-patient ... willing to research every aspect prior to commencement ... and also willing to make adjustments after installation ... to rectify problems that were undoubtedly not considered prior to installation.
No offense is intended, here -- I'm just working with your 'novice who is easily frustrated' commentary. I'm no pro by any stretch, but I undertake electrical modifications that are minor in terms of complexity but major in terms of patience and detail-orientedness. This is one such project and I'd not undertake it lightly, myself.
It's very do-able, but a lot of thought and research needs to go into what size wiring you need, where fuses and relays go, what you tap to turn on the relays, how you protect the wiring (including where you route it under the truck), where and how you mount the lights, etc. You get the idea. If it were me I'd solder my connections, too; I can't stand plastic wire taps as I've seen them come off and cause issues too many times to count.
This is something you need to dig into if it's to be a DIY project... and you need to take as long as it takes to do it right. My post has already given you some things to consider. It's a food-for-thought starting point if you're going to tackle the project, yourself.
Last edited by SurrealOne; 05-22-2012 at 11:49 AM.
2004 GMC Sierra 1500 5.3L V8 4x4 SLT Extended Cab Long Bed
(Garage Link: http://www.gmtruckclub.com/forum/sho...MC-Sierra-1500)
NRA Certified Instructor, Range Safety Officer, & Benefactor Member
"I have sworn upon the altar of God eternal hostility against every form of tyranny over the mind of man." -- Thomas Jefferson
"The only difference between the topic police and the thought police ... is spelling." -- Anonymous
By 05-Silverado in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 04-19-2011, 08:57 PM
By silverZ71 in forum General Chevy & GM TechReplies: 1Last Post: 01-27-2011, 10:43 PM
By buzzsaw714 in forum General Chevy & GM TechReplies: 8Last Post: 11-07-2010, 07:53 AM
By Rancor2001 in forum General Chevy & GM TechReplies: 4Last Post: 12-21-2009, 07:24 PM
By burb in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last Post: 11-01-2006, 10:01 PM
Tags for this Thread