Results 1 to 3 of 3
Thread: Electrical Ground - Help!
05-24-2012, 05:48 PM #1
- Join Date
- Jan 2010
- Clovis, CA
Electrical Ground - Help!
Well first off i have a 1994 K1500 with 5.7L
I had all my freeze plugs replaced after it sitting for a year with no anti freeze. When i had my buddy replace the plugs, it has been idling funny. It will surge and my emergency brake light flashes at me and it is in sync with the surge. When i looked under the hood, i noticed that my battery NEG cable was connected to an intake bolt. Now i dont remember seeing it there before. I dont know where to put the cable too. And further more when i put my blinker on it uses a whole amp to use. I think i have a faulty ground somewhere.
Now there is alot of stuff here. I dont know if its all a different issue. Or i just dont have a good enough ground. Either way can someone just point me into the right direction.
05-24-2012, 06:12 PM #2
Is it possible for you to post a picture? I think I have your fix I just don't want to put it on here without getting some confirmation of my suspicion. I need a pic of the negative connected to the battery and then where it is connected to your intake.
05-25-2012, 05:24 PM #3
By eag123 in forum Lifted & Offroad SuspensionReplies: 4Last: 02-04-2012, 07:41 PM
By express conversion in forum Chevy Express Forum (GMC Savana)Replies: 5Last: 06-12-2011, 12:44 PM
By stephan in forum General Chevy & GM Tech QuestionsReplies: 33Last: 12-24-2010, 10:56 AM
By Johnny_Buchanan in forum The Coffee Shop ~ Chit ChatReplies: 15Last: 10-16-2010, 10:18 AM
By drillRR in forum General Chevy & GM Tech QuestionsReplies: 3Last: 03-02-2009, 06:22 PM
Tags for this Thread