Results 1 to 5 of 5
Thread: Stupid Door Lock Button!!!
05-29-2012, 06:48 PM #1
Stupid Door Lock Button!!!
I let the GF drive the 1999 suburban this weekend, and now the electronic door lock switch on both front doors won't work. The rear doors don't have that switch, but all four doors (and, I'm assuming the back barn doors) work fine when manually locked and unlocked. And, here's the kicker... they electronically lock and unlock with the alarm remote! I checked any fuses that I thought might have blown, but I didn't find a bad one. I pulled out the piece on the doors that holds the switches and checked to make sure one didn't come loose... nope - they are all secure. What am I missing?!?I like you.
05-29-2012, 08:21 PM #2
Test the lock switch to see if it is sending a signal out when pushed
05-29-2012, 10:12 PM #3
06-11-2012, 10:27 AM #4
If one is broken it may affect the other one from working, we had a similar problem at the factory we had a shipment that was 50% bad.
Technology is great, when it Works,
And one Big Pain in the Ass When it Doesn’t.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.
06-11-2012, 11:06 AM #5
I was wondering that! I thought there's a chance that if one switch goes bad, it also makes the other not work. I'll run a multi-meter across the switch contacts and see if one is different than the other.
By alchemist1 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 11Last Post: 11-07-2011, 06:15 PM
By rustymetalbob in forum GM Electrical TechReplies: 3Last Post: 03-07-2011, 11:13 AM
By awparran in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last Post: 02-14-2010, 11:41 PM
By sloppytot in forum Chevy Equinox Forum (GMC Terrain)Replies: 0Last Post: 12-07-2009, 04:09 PM
By Mean_Green_95 in forum General Chevy & GM TechReplies: 20Last Post: 08-04-2009, 03:24 PM
Tags for this Thread