Results 1 to 2 of 2
Thread: Potential oil pressure issues?
06-12-2012, 09:25 PM #1
- Join Date
- Jun 2012
Potential oil pressure issues?
I recently bought a s10 with a V8 swap already done to it and I have been spending the last few weeks of fixing testing and tweaking to my likes. I have noticed the oil pressure being really high and I was wondering if it is too high for its own good. At cold idle its at 93psi, after 5 minutes of idling it will settle at 50psi and after a short drive its down to 25psi. But when i get the RPMs up to 4000, Im back up to almost 100psi. which is way over the rule of 10psi for every 1000 rpms. because of this I will also get some oil coming out of valve cover breather filter on a high rev. The motor that is in the s10 is an Outlaw Circle track racing 350 with a 396 stroker kit bored .60 over, bowtie heads and a bunch of other stuff I can't remember off the top of my head. there is a high pressure pump installed when the motor was built my concern is if the oil will just blow by everything and not actually lubricate? blow some seals? blow oil filters?
06-13-2012, 04:34 PM #2
- Join Date
- Nov 2006
- Canyon Lake, Texas
- Blog Entries
Welcome to the G M T C ! I suggest you try posting in one of our "Technical" forums. Good luck!
2010 Z/71 Colorado C/C
Black 4X4 w/5.3L V8
2007 Winnebago Adventurer
w/8.1L Chevy & Allison 6spd.
Canyon Lake, Texas
By blk04cobra1 in forum Chevy Silverado Forum (GMC Sierra)Replies: 16Last Post: 06-06-2013, 08:51 AM
By Mikethatiger23 in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last Post: 11-22-2012, 02:15 PM
By rglickman27 in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 06-07-2010, 02:37 AM
By tcook18 in forum GM PowertrainReplies: 2Last Post: 03-15-2010, 09:48 PM
By CLMonti in forum GM PowertrainReplies: 1Last Post: 02-19-2009, 08:18 PM
Tags for this Thread