Results 1 to 4 of 4
06-15-2012, 09:21 AM #1
Putting on glass pack muffler on?
OK, for those of you that know me, you know I am no mechanic what so ever. I deed to replace muffler because I was told that something inside was broke. So, I want the more aggressive sound. Thinking of thrush glass pack, why because it is cheap and sound is what I am looking for looking for. I have noticed that they technically come for my truck; can I still put it on? with that said:
(I know there are bends in the pip and it won’t line up right)
What do I do? (Buy it and take it to a muffler shop and say I want this on there or Buy some adapters and attempt putting it on that way or go straight out the back instead of behind the wheel.
What do you think?????
It is 2008 4.3 V6 Ext CabTim Walters (Curky)
Wrangler AT/S 265/70R17 - Trail-FX window vents - Husky fitted splash guards - Silver Star zXe - Leveling kit -
06-15-2012, 11:23 AM #2
I've done some exhaust work in the past, but they were all complete bolt-on kits from the manifold back.
What I would do:
If you're sure that's the muffler you want, measure where your stock muffler is fitted now, then measure the Thrush (also check to see if they have varying sizes available to fit).. basically it's going to be a call you have to make based upon what you think you can handle. I have not yet messed with the exhaust systems personally on the NNBS pickups, I had mine done by Midland Muffler... so I can't tell ya what all you will need.
Good luck on it bud, I hope you get the sound you're lookin for!
"If you're not living life on the edge, You're taking up too much space"
"Truck Norris"- 2008 TX Edition Silverado
- McGaughy's 4/5 Drop Kit
- Apline Type R 10s & Amp
- Pioneer 6 Disc Touchscreen Deck
- Nightmare Breed Motorsports custom tune
- Custom 3" dual exhaust through x-pipe dumped at axle
- Airaid CAI
- Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
"Kristine" - 1991 Nissan 240sx
- Cut to pieces, LS build pending
06-15-2012, 12:37 PM #3
Not a fan of glass packs myself (just personal preference). But this might be a good idea to dual it out. The 4.3 sounds pretty good. Most likely you'll need a 1 in, 2 out muffler to do that. One tailpipe going straight out the back looks way too ricey. If you don't want to dual it out though, a muffler shop can bend a new tailpipe for you and that's what they'll probably do if it won't line up. Exhaust piping is dirt cheap. I ran straight pipe on my 87 IROC from the cat all the way to the back of the car for something ridiculously low price out the door.93 Suburban (Southern Slayer): TBI 350, 4L60E
73 Z28 Camaro: L82, TKO 600
"...Death smiles at us all, all a man can do is smile back..."
06-15-2012, 01:27 PM #4
Last edited by Curky; 06-15-2012 at 01:39 PM.
By Rockstarrchevy81 in forum Performance & FuelReplies: 6Last Post: 06-14-2011, 04:18 PM
By Steve in forum Chevy Volt ForumReplies: 0Last Post: 09-08-2010, 08:50 PM
By jdickerson83 in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last Post: 12-13-2009, 01:21 PM
By J_chevyman in forum The Coffee Shop ~ Chit ChatReplies: 2Last Post: 12-13-2009, 11:15 AM
By bballtilg15 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 12-10-2009, 06:31 PM