Results 1 to 2 of 2
Thread: 6.2 engine swap
06-20-2012, 10:04 AM #1
- Join Date
- Mar 2009
6.2 engine swap
I have a 2009 silverado that had a 5.3 lmg motor that I am wanting to swap with a l9h 6.2 from a gmc. I have the 6l80 tranny so it should be a direct swap but the l9h has vvt and I am wondering if I can just switch over ther timing chain sprocket and cover to eliminate the vvt and what advantages and disadvantages will it have?
Also if I wanted to go with the vvt how would I go about since my ecu and harness was not equiped for vvt?
The first pic is the one with vvt
06-20-2012, 01:23 PM #2
My guess would be that to make that swap work, you need the entire system, motor, harness, and ECM. Try what you asked about, and I suspect you will give your onboard ECM a lobotomy. But I'm just guessing, I have no experience with the newer trucks.
Brian Larson CST. KC9DAK.
87 GMC G20 6.2 diesel.
By RallySTX in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last Post: 05-19-2012, 10:26 PM
By mixednuts in forum Member IntroductionsReplies: 5Last Post: 12-03-2011, 10:58 PM
By Lgriffi in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 02-06-2010, 11:37 AM
By peabody_80 in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 04-27-2009, 08:27 PM
By Jake in forum GM PowertrainReplies: 2Last Post: 04-15-2008, 12:44 AM
Tags for this Thread