GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default Pulling VIN# from ECM

    What would be the easiest way to do this? I don't have a harness with the OBD2 port that could be used to talk to the ECM. Please advise! thx matt

  2. #2


    I don't know if the VIN is burned into the programming anywhere on the computer, but I suspect if it is, it's only accessible using a GM Tech-II tool or the like. Regular code readers can't read it.

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 277K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half

    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

Similar Threads

  1. pulling power
    By newfiebullet in forum GM Powertrain
    Replies: 14
    Last: 10-18-2010, 06:25 PM
  2. Help pulling rotors
    By pmartin816 in forum Lifted & Offroad Suspension
    Replies: 0
    Last: 07-05-2010, 10:59 AM
  3. Pulling Codes...
    By Thunderchild in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 3
    Last: 03-23-2010, 09:25 AM
  4. Pulling VSS
    By KAHruzer in forum Chevy C/K Truck Forum
    Replies: 1
    Last: 10-12-2009, 01:10 AM
  5. T.B. Pulling to the right
    By miser01 in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 1
    Last: 01-06-2007, 10:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts