alright guys im looking for some advice in building my own front bumper...
im a pretty simple guy so all im looking at is a simple tube bent to contour to my bumper and to stick out a little bit
the whole tube idea is the simplest part because i can get a tube and have it bent it is only a single tube, and im sure it would contour nicely like my cousins did, but im expecting the more difficult part to be actually making the bracket that will attach this tube to the frame, and making the skid plate shouldnt be to crazy either, just a flat piece of metal cut in a triangular shape. does anyone have any measurements as to the distance, height, etc. between the frame horns or any other relevant measurements that could save me some time?

basically this is what my cousin in colorado built for his truck, although hes not very good at communicating back to me:/

Click image for larger version. 

Name:	3.jpg 
Views:	155 
Size:	64.1 KB 
ID:	40991

oh and just for the thought of sharing this is also his rear bumper he custom made
Click image for larger version. 

Name:	1.jpg 
Views:	110 
Size:	75.7 KB 
ID:	40990