Results 1 to 3 of 3
Thread: Removing Rear bumper for NNBS
06-29-2012, 09:28 PM #1
Removing Rear bumper for NNBS
I tried a site search but didn't find anything for the nnbs Sorry if I over looked it. I'm wanting to remove my rear bumper, I've seen a video on youtube but the guy took his apart into several pieces. Can I just pull it off in one piece by removing the 2 or 4 bolts to the frame? I'm planing on painting the chrome, & on my passanger side in the chrome piece is a nice dent I'm going to see if I can remove. The bumper may be off for a few days so I'll have to rig up the tag & tag light to pass mustard til I get everything back together, guess if I mess up the bumper pounding out a dent it would be all the more reason to get a roll pan lol.
Anyway to sum it up needing tips on removing the read bumper for a 07+ Silverado2007 Silverado RS, 4.8 V8, 2WD
Flowmaster Super 44 with turndown
Black painted front grille & bumper
Black / red Painted bowties
Black 18in. Silverado wheels
Black / Red interior conversion (in process)
89 Chevy Sport tribute decals
06-29-2012, 09:52 PM #2
I don't know if this Diagram will help, with removing the Rear Bumper, I thought I would posted it up, just in case its able to help you??
Part No. Description 2 **25542 BULB RR LIC PLT LP,LAMP #192,(ALL MODELS ALL YEARS),(12V 5W),(#168,3 CP),(08.991) * 3 **284310 PAD RR BPR STEP CTR * 5 **284313 PAD RR BPR STEP OTR * 5 **284314 PAD RR BPR STEP OTR * 7 **284307 CAP RR BPR IMP BAR END 7 **284308 CAP RR BPR IMP BAR END * 9 **519976 BOLT RR BPR IMP BAR,HFLGE,M8X1.25X20,15.6 THD,18 O.D.,8.8,GMW3359,(M8 X 1.25 X 20) 10 **932302 RECEPTACLE TOW VEH ELEC,(INCLS CAP) (Z82) 12 HARNESS CHAS WRG,(SEE GROUP 02.000 "WIRING HARNESS/CHASSIS" FOR DETAILED ILLUSTRATED VIEW) (NOT AVAILABLE) * 13 **289435 BAR TRLR HITCH DRAW
Replaced by: **899966
* 14 **37772 NUT RR BPR IMP BAR BR,M12X1.75,10.6THK,28 O.D.,10,7111M,(M12X1.75),(08.917) 15 **37772 NUT-HEX W/CON WA RR BPR IMP BAR,M12X1.75,10.6 THK,28.0 OD,10,7111M,PREV TORQ,(ALL MODELS ALL YEARS),(M12X1.75) 16 **284317 BRACE RR BPR IMP BAR,(TRIANGULAR)
Replaced by: **899963
16 **284318 BRACE RR BPR IMP BAR,(TRIANGULAR)
Replaced by: **899964
17 **775522 BRACE RR BPR IMP BAR,(TUBULAR) 17 **775521 BRACE RR BPR IMP BAR,(TUBULAR) 18 **508277 NUT RR BPR IMP BAR BR,HEX W/CON WA M6X1 THD,OD-19 PEOR 9,(ALL MODELS ALL YEARS),(M6X1X5.5) 20 **609856 PLATE RR BPR IMP BAR BRKT ANC 21 **516600 BOLT RR BPR IMP BAR,(M10X1.5X40,23.25) 23 **769308 RETAINER SPA WHL LK CYL CASE 24 **040331 RETAINER SPA WHL LK CYL CASE RET,(41.0 DIA X 7.1 MM) 25 **951951 BAR RR BPR IMP (NOT AVAILABLE) 28 **23101 SCREW RR LIC PLT,TAP,M6.3X1.81X16,14.55 O.D.,7114M,PZ0R
5.3 l 3.73 l G80
BLACK BEAR CUSTOM TUNE
SNUGTOP l COLORMATCH l KATZKIN
09-22-2012, 09:28 AM #3
to remove the bumper by removal of just the frame bolts you must un bolt the 8 bed bolts. then jack up the rear of the bed 2-3 inches then the bumper slides out.
doing this and lubing those 8 bed bolts will then aid you when the fuel pump needs replacing.
getting at all those bumper studs is a hard time consuming job . lifting the bed is quick , make sure you use some penitrating oil on those studs of the bed/bumper and work then out/in so that you do not break anything.
make sure the 4 electrical connectors and wires at the rear are disconnected and moved to not get damaged.
By conroe in forum Chevy Truck AccessoriesReplies: 5Last: 03-28-2012, 12:17 AM
By LtColSpit in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last: 11-06-2011, 04:00 PM
By Leverlution in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last: 08-16-2010, 07:18 PM
By cwaters425 in forum General ClassifiedsReplies: 1Last: 05-18-2010, 08:35 PM
By SoCal Chevy in forum Chevy Truck AccessoriesReplies: 12Last: 11-29-2009, 09:48 AM
Tags for this Thread