Results 1 to 4 of 4
12-10-2007, 11:43 AM #1
HELP PLEASE! Nav in 07 Classic, Dealer says no go
I have a 2007 Silverado Classic. I had the 6 cd changer radio. I have no Y91 or Y92 options.
I bought on ebay a non-lux navigation unit that was taken out of a 2006 Trailblazer. I put it in, all plugs matched, etc. Turned it on the the THEFTLOCK ACTIVATED was on the screen. No problem. Took it to the dealer, and they say they cannot get to the nav unit, they cannot unlock it.
the unt's GM P/N is 15800000
My truck is a 2007 Silverado Classic, Extended Cab
Has Bose but not the lux package (Y91,Y92)
I gave the dealer these instructions I found, but they said it didn't work:
Radio Setup With RPO UM8
Radio Theft Procedure
Complete the following procedure, using a scan tool, in order to properly set up communication:
At the Main Menu screen, select: Diagnostics.
At the Vehicle Identification screen, select the following options:
LD Trk, MPV, Incomplete
At the System Selection Menu screen, select: Body
At the Vehicle Identification screen, select the following:
Appropriate Air Conditioning
At the Body Screen, select: Navigation Radio.
At the Radio screen, select: Special Functions.
At the Special Functions screen, select: VIN Relearn.
At the VIN Relearn screen, the scan tool will display "Do you want to clear radio theft information?"
To begin clearing, press the soft touch key on the top right of the scan tool. The scan tool will display "Clearing Radio Theft in Progress."
Press EXIT on the scan tool and cycle the ignition.
I tried called GM, no help. I tried calling Delphi, no help.
Can anyone on this forum help me? Give me instructions to give to the dealer to get the theftlock off? I appreciate it in advance.Padre (Chip)
When the power of love overcomes the love of power, the world will know peace -- Jimi Hendrix
2009 Silverado 2500HD Extended Cab, long bed, Blue Granite
12-10-2007, 11:55 AM #2Some people call me the space cowboy ... some people don't.
2010 Chevy Silverado Z71 Just picked it up
2007 Chevy Colorado Just traded her in!
12-10-2007, 12:09 PM #3
I’m just guessing here, because I know very little about the navigation systems.
But is it possible because the truck didn’t come with the navigation system there are things missing. Like a gps, antenna, module and other things.
There are other things that are also part of that system I just can’t think of them right now. Oh ya it is capable of diagnosing engine problems and fixing them.
Also you may even have to change the computer module.
Technology is great, when it Works,
And one Big Pain in the Ass When it Doesn’t.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.
12-10-2007, 04:22 PM #4
Well, the answer was fairly simple.
In order to program the 20-2007 Silverado's that did not come with navigation, you have to program it as a TAHOE, not a Silverado. Once the dealer did this, boom, it was up and running.
All the trucks are wired for this navigaiont unit, but you will probably need to add a VSS wire, as I did, to make the GPS work right. Other than that, everything else works fine: XM, Onstar, Radio, wheel controls, everything.
So thanks everyone. Hope my question can help someone else.
By 09Z71 in forum Chevy Colorado Forum (GMC Canyon)Replies: 5Last: 07-15-2010, 11:01 PM
By bradadkins in forum Photo & Video GalleryReplies: 4Last: 04-08-2009, 04:08 PM
By Cableguy in forum Product ReviewsReplies: 2Last: 05-09-2007, 07:53 PM
By dwill3015 in forum Product ReviewsReplies: 2Last: 02-08-2007, 04:59 PM
By ciosclone in forum Product ReviewsReplies: 0Last: 02-08-2007, 04:21 PM
Tags for this Thread