GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3
  1. #1

    Default Firestone Helper Airbags- 1991 Chevy Suburban (air springs)

    I just finished installing a pair of Firestone helper airbags on my 91 Chevy Suburban tow rig/road trip truck. These airbags, or air springs as Firestone calls them, are designed to help level the truck under load. They make many kits that fit most trucks and SUVs. The kit that fits 73-91 Suburban 1500 and 2500 trucks which includes me is kit #2100. Firestone claims that they do not increase the maximum capacity of the truck, and legally, they don't. But, I am using them on my truck to help offset the lower weight capacity of my 1/2-ton springs; my axle is more than up to the task of the additional load since it is a 1-ton 14-bolt axle with 4.10 gears.

    For my particular application, I had to drill 3 bolts holes in the frame rail for the upper bracket and enlarge an existing hole. I first enlarged the existing hole, then used a large C-clamp to hold it while I leveled the bracket and drilled the other 3:
    Click image for larger version. 

Name:	IMG_0363.jpg 
Views:	441 
Size:	53.7 KB 
ID:	41515

    Then I pulled the upper bracket off the frame rail and assembled the upper bracket, air bag, lower bracket, and air fitting. After assembling the setup, I bolted it back to the upper frame rail and using the carriage bolts and lower bracket brace, secured the lower bracket to the spring pack. I had to shift the bracket slightly to make sure the bag was vertical.
    Click image for larger version. 

Name:	IMG_0364.jpg 
Views:	302 
Size:	69.8 KB 
ID:	41516Click image for larger version. 

Name:	IMG_0365.jpg 
Views:	312 
Size:	79.9 KB 
ID:	41517

    Then I hooked up the airline to the bag, and routed it to the air chuck fitting. I placed the air chuck fitting in an existing hole in the body that was slightly behind the tire, but still accessible with the tire on:
    Click image for larger version. 

Name:	IMG_0387.jpg 
Views:	286 
Size:	84.2 KB 
ID:	41518

    Then, it was time to air the bags up. I aired them up in steps to illustrate the lift generated by the bags. First, with no air:
    Click image for larger version. 

Name:	IMG_0372.jpg 
Views:	486 
Size:	56.8 KB 
ID:	41519

    Then I stepped it up to 25 psi:
    Click image for larger version. 

Name:	IMG_0373.jpg 
Views:	268 
Size:	55.4 KB 
ID:	41520

    Then upped it to 75:
    Click image for larger version. 

Name:	IMG_0375.jpg 
Views:	275 
Size:	57.7 KB 
ID:	41521

    With no real weight, the bags were ballooned out pretty good:
    Click image for larger version. 

Name:	IMG_0377.jpg 
Views:	308 
Size:	82.6 KB 
ID:	41522

    With the bags aired up to 75psi, we took it out for a quick test drive. The ride really wasn't rough like I was expecting it to be, but it was obvious the suspension was stiff because the rearend felt like it was skipping and not keeping good contact with the road.

    Here's what it looked like sitting on the tires with 75 psi. The rear's pretty darn high with all that air in the bags:
    Click image for larger version. 

Name:	IMG_0378.jpg 
Views:	337 
Size:	79.5 KB 
ID:	41523

    And here's what it looked like with around 10 psi; much more reasonable:
    Click image for larger version. 

Name:	IMG_0380.jpg 
Views:	281 
Size:	54.8 KB 
ID:	41524

    Since I just got them installed, I haven't done a load test with them. I may hook the camper up to see what it looks like with the bags installed and inflated. I should be able to level out the rear quite nicely with them. I'll update the thread once I get some driving time in with the bags both loaded and unloaded.

    Questions, comments, and otherwise are always welcomed.
    Last edited by Crawdaddy; 09-09-2012 at 03:17 PM.

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 265K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half

    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  2. #2
    Jr. Mechanic
    Join Date
    Mar 2009
    Central Nova Scotia


    done the same airbag setup on a 1993 Chev 1/2T 4x4 I had,worked very well ,but never ever did I put 75 PSI in,even to see what it would look like,nice job by the way.

  3. #3


    My company vehicle is a 2002 E450 wih a 30' motorhome box on it. With the Firesone bags I try to run 80 PSI and it helps with the leveling and stops the huge amount of sway when they are deflated. Sadly mine leak and the company doesn't want to repair them , because other trucks don't have them and they do just fine. ???? Other truck have different suspensions as most are F550 chassis.
    2010 Chevy Silverado Z71 ext cab.4x4
    72 Monte Carlo 350-415 hp- sold (June 2011) to pay medical bills
    79 Impala 350 4bbl 375 hp- sold (June 2011)to pay medical bills

    "If He asks you to go a mile go two"

Similar Threads

  1. 57275 Air Lift Helper Springs Load Lifter 5000
    By parts bot in forum Chevy Accessories eBay
    Replies: 0
    Last: 05-28-2012, 06:10 PM
  2. Helper springs vs air bag 2007 Silverado
    By mx721suzuki in forum Lifted & Offroad Suspension
    Replies: 8
    Last: 04-11-2011, 03:18 PM
  3. Air Bags or Helper Springs?
    By Mike S. in forum General Chevy & GM Tech Questions
    Replies: 8
    Last: 07-25-2010, 10:29 PM
  4. helper springs?
    By skivhere in forum Lifted & Offroad Suspension
    Replies: 6
    Last: 02-02-2009, 10:52 AM
  5. Air Bags / Helper springs .... anyone [Expired Topic]
    By MN_Burbon in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 5
    Last: 06-22-2005, 04:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts