Results 11 to 17 of 17
Thread: Towing with a 2006 Vortec Max
05-28-2013, 09:18 PM #11
- - - Updated - - -
This is my rig towing the beast of a trailer. My wife towed it two days ago (finally got her to try it), and her comment was "Wow! This is SO much easier than the Expedition towing that 19' trailer!" NO kidding. Love those dual cams... The power is nice, too. Just toss it in 2nd gear and go up and down the mountains all day long without shifting.
This last trip, I got 8.9 MPG, but it included the nastiest grade within 200 miles. Up and down I went with the flow of traffic... the CAR traffic. I just chuckle when I, at 60-65 MPH, pass those big diesels running at 40MPH up that hill.
The picture is deceiving too. I actually still have quite a bit of play in the rear suspension. I've thought about timbrens, but the ride stabilizer button works wonders if any bouncing starts. Every time I drive this truck, I'm ticked to death to have gotten so lucky to have found it. Blessed even.2006 Vortec Max 1500
-Custom Tune (389HP 440 Ft/lbs Trq - Dyno'd) | Volant CAI | Magnaflow Dual-in/out Exhaust w/3" stainless pipe tips | Fully Built Transmission w/ Red Eagle Clutches & Kolene Steels w/ Corvette Servos and Stage2 Shift Kit | 35K Tranny Cooler | Mobil 1 | Royal Purple Rear Diff
-Spray-in Bed Liner
-Premium Sound w/lifetime Satellite Radio | Leather | Sunroof | Heated Seats
-Limbstriping from USING the truck (those are badges of honor)
05-28-2013, 11:11 PM #12
Nice indeed! I'm liking that 6.2 more and more! And the beefed up transmission! For my little trailer, about a 3.73 differential should be good, it only weighs 3,200 empty.That old man, he don't think like no old man.
"He's pinned under an outcropping of rock. Lucky for him, the rock kept the dirt from burying him alive". Dirt, it's nothing but dirt, I tell ye...
"I thought I was wrong one time, but I was mistaken." Command Sergeant Major Jim
06-05-2013, 02:39 PM #13
- Join Date
- Jun 2013
Have you ever thought about a rear axle temperature gauge? Ive seen them on 3500 and larger trucks but never anybody with a 1500.
Also your transmission has a plug above the shift shaft on the driver side. You can remove that plug and thread in a Autometer temp sensor thats 1/8" NPT and its a pretty accurate reading. ~ 10* of the OEM sensor in the bottom of the pan.
06-06-2013, 10:16 AM #14
Additionally, a vast majority rear-axle heat increases come from torque spikes, which are incredibly commonly while doing 4x4ing (think everytime you're in a low gear and BAM you hammer the thing to climb over something), they're not very common in a towing environment. Sure, the temps can climb... But not nearly as likely unless you're doing very very long hauls.
That being said, I'm still planning on getting an expanded capacity differential plate, with fins, at the next change (due this fall). This'll add an extra quart or so of fluid, and lower the temps... But I'm only getting it, because they look cool from behind. LOL
The Autometer plug is definitely an interesting option. Thanks for pointing that out!
Last edited by Skippy; 06-06-2013 at 10:34 AM.
06-06-2013, 10:46 AM #15
- Join Date
- Jun 2013
Ive got the aluminum girdle for my 8.6" 10 bolt and noticed it has a 1/8" npt plug on the bottom and it dawned on me it was either a drain or for a temp sensor. i changed my fluid about ever 5 years and thats alot of towing and racing. Gears have 285,000 miles on them and just changed the pinion bearings 3 months ago. Eaton LSD has 130,000 miles on it and just did first fluid change when i put the new bearings in haha.-Jonathan
2000 ECSB Silverado 2WD
LQ4 with Isky 215 Turbo Cam
4L80E KB Racing S475 Turbo Kit
06-07-2013, 05:47 PM #16
Bet his day was a lot worse than he thought!
06-07-2013, 06:55 PM #17
- Join Date
- Jun 2013
Wow ive never seen that on the road. Ive seen it alot at the mud and dirt races.
My ring gear has metal flowing from the valleys of the teeth. Pretty sure that was when the pinion bearings had some slack. But then again ive pulled some heavy loads and was heavy on the throttle ha.
12, 000# wet sand was fun. 16, 000# ditch witch was quite a fun one too.
I put a class v hitch on it after I bent the rear frame some with a cheap reese class nothin hitch.
By parts bot in forum Chevy Trucks For Sale eBayReplies: 0Last: 03-09-2012, 08:40 PM
By ChevyFan in forum Chevy Trucks For Sale eBayReplies: 0Last: 10-26-2011, 04:50 PM
By patrad in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 01-10-2008, 11:35 AM
Tags for this Thread