Results 1 to 5 of 5
Thread: dust in cluster??
07-13-2012, 09:45 PM #1
- Join Date
- Jul 2012
dust in cluster??
I was looking at my gauges and noticed it needs to be cleaned lol, i didnt think it could get dirty in there! how would one get in there to clean it? If i do go to do it can i change out the cluster for a different one, like a different design or something shiny lol2004 Chevy Silverado z71, second owner
1994 Pontiac Trans Am GT, yellow, Hard top (yup its a GT):glasses:
07-13-2012, 10:22 PM #2
You can pop the instrument bezel off and you unscrew the cluster and take it out. Takes a 7mm socket. When you get it out will see a way to pop the top plastic off and clean it. I haven't done mine in a while so some details might be missing from memory. Hopefully someone will fill in the gaps
If at first you don't succeed, chances are, you are using too small of a cheater bar
1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
US Navy Sailor :sign0011:
07-13-2012, 11:02 PM #3
when i detail for the lot i usually just use water from a spray bottle (dont drown it) and use your air compressor to blow it out. any excess i use a regular old degreaser and a dirty shammy to wipe down and a tiny screw driver to get the stuff out of the cracks.Silver 2012 Chevy Silveradeaux 4x4 "All-Star" edition
-2 inch daystar leveling kit, and took the ugly 4x4 stickers off, window tint (to match rear), GM factory bedliner, sylvania silverstar ultra low beams. -To come: Topper (A.R.E. z series, or Bestop), Eagle alloy 050 wheels with toyo open country m/t tires (33"), maglite and bracket, possibly removing side badges, old school black z71 stickers.
05-08-2013, 04:54 PM #4
only way is to take the dash cover off, then the clear plastic.
a good time to polish the clear lense part with something mild, like toothpaste and a lot of water.
use a soft paint brush to clean guages and around the needles
taaa-daaa!!!Gas was $1.83 when Obama took office.....
06-17-2013, 01:58 AM #5
- Join Date
- Jun 2013
- 1391 N Jefferson St., Anaheim CA 92807
The best method for removing dust from the plastic without scratching it is to use a Swiffer Duster. it differs in that it attracts and holds the dust, while putting almost no pressure on the plastic. After removing the slightly abrasive dust, then you can use liquid or aerosol products to complete the clean-up process
By bimmer84 in forum General Chevy & GM Tech QuestionsReplies: 7Last Post: 01-22-2011, 09:43 PM
By iq160plus in forum GM PowertrainReplies: 4Last Post: 10-14-2010, 04:31 PM
By sperhus in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 06-27-2010, 03:47 PM
By 08SierraSLE in forum Chevy Silverado Forum (GMC Sierra)Replies: 12Last Post: 07-23-2009, 12:18 AM
By smoke20 in forum Lifted & Offroad SuspensionReplies: 0Last Post: 02-03-2009, 12:39 PM
Tags for this Thread