Results 1 to 2 of 2
07-17-2012, 01:06 PM #1
- Join Date
- Jul 2012
1992 GMC Jimmy - Receiver Hitch Removal
So I need to drop the gas tank to replace the fuel pump. But not only is there a plastic cover in the way but the receiver hitch also runs right down the middle of the tank. So I started taking it off. There are four nuts to remove under the rear bumper and then one behind each rear wheel.
The nuts at the back (under the bumper) are connected to bolts which were dropped through from above. I got all of the nuts off but one. The problem is that with the last one, the bolt is just turning and there is no way to get a wrench up and in there onto the bolt head to keep it from turning to take the nut off. Has anyone else run into this?
By parts bot in forum Chevy Parts eBayReplies: 0Last: 11-23-2011, 02:10 PM
By hall1836 in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last: 06-23-2010, 02:45 AM
By neversummer in forum General Chevy & GM Tech QuestionsReplies: 1Last: 02-16-2010, 03:41 PM
By neversummer in forum General Chevy & GM Tech QuestionsReplies: 0Last: 11-05-2009, 08:47 PM