Results 1 to 8 of 8
07-13-2012, 03:31 PM #1
- Join Date
- Oct 2009
- Forest Hill
Will 2500 rear springs fit on a 1500?
Just wondering if the rear leaf springs from a 2500 or even a 3500 will fit on my 2002 Silverado 1500 LS extra cab 4x4. I am picking up a 27' trailer this weekend and I am already anticipating my trucks weaknesses.......thanks...
1989 Chevy V1500 Suburban 4X4, long tube headers & xover pipe. w/1985 350 4bbl.
2002 Silverado 1500 5.3L Ext. Cab
2005 Wrangler Rubicon 4.0L
07-13-2012, 03:48 PM #2
Do you have 2500 springs ready to go? May be a lot easier to add a leaf spring or install airbags to help with the weight. What kind of 27' trailer? If a camper add your gear and weigh directly over the trailers axel or slightly behind to help reduce the tongue weight, that should help as well
Not sure if 2500 springs will fit, best thing to do is measure your and the ones you want to install
2011 GMC Sierra 2500HD SLE 4WD/Z71 Crew Cab Gray Green Metallic 6.0 Gas 6spd Auto 3.73 gears, HD locking rear differential. 18"Alum Wheels (Stock) Stock Michelin LTX AT-II Tires, Banks Monster Exhaust, Westin Platinum SS Oval Step Bars, EGR Window Deflectors, Extang Trifecta Tonneau, Front and back Weathertech Digitech liners. Factory Remote Start with Onstar App on iPhone.
2003 GMC Envoy SLE Black 4WD 4.2 175,000 Miles all original drivetrain and runs like a champ and no rust or rot!
07-13-2012, 04:10 PM #3
Springs are only part of the equation. The entire rear end in the 2500/3500 is much heavier built to handle the additional weight. Not to mention possible differences in the frame. You can't make a 1500 into a 2500/3500 by just swapping springs.2004 2500HD Crew Cab LT 4x4 6.0L
No mods (yet). Just like God and GM made her.
07-13-2012, 04:16 PM #4
07-13-2012, 06:08 PM #5
2009 Chevrolet Silverado 1500 LT Z71 Crew Cab "All-Star Edition"
Line-X'd Custom Brush Guard(Heavy Duty)
5.3L Flex Fuel
Factory Black Running Boards
BF Goodrich All-Terrain KO's(265/65R18)
2" Rough Country Leveling Kit
EGR In-Channel Vent Visors
Exterior PLUS Package
Interior PLUS Package
K&N Drop-In Air Filter
Bowtie Mud Flaps
Cat-Back Dual Exhaust
Diablo Sport Predator(AFM Disabled)
Next Planned Mods
07-14-2012, 02:55 PM #6
A load distribution bar kit would be my first step before swapping leaf springs. Reese, www.reeseprod.com has many applications. If you have an RV dealer near by they usually carry them. The money you'll spend doing the swap, you cant get the load leveling you need without making your 1500 drive like a tank. My 1500 pulls my 20 foot 3000 lbs trailer with a tongue weight of 280 lbs without breaking a sweat or squatting.
My best friend and fellow camper/trailer owner pulls his 25 ft 4600 lbs trailer with a 1500 with much the same ease. He did invest in an all in one anti sway and leveling kit, very necessary for maintaining control at highway speeds. Especially when it gets windy things can get interesting when a tractor trailer passes him.
You did post the length of your new trailer but not the weight of the trailer or tongue weight. The average 27 ft being in the 5 to 6 thousand pound neighborhood with a 550 lbs tongue weight shouldn't be too imposing on your truck. I would defiantly look at a load leveling kit before putting in an add a leaf. I did have airbags from "Airide" on my last truck and being able to air up when I loaded the bed and air down when empty was cool and useful.
Last edited by Kapelusprime; 07-14-2012 at 03:01 PM.I am a American solder, I am a member of the finest fight force on earth, I am the bump in the night. I will defend the United states of American Against all enemies both foreign and domestic. Repent now all those who would do my nation and it's people harm; For when we come it will be too late.
2011 GMC Sierra SLE, Z71 with 5.3 l and max tow/haul package
07-14-2012, 05:42 PM #7
I'm assuming the leaf springs are pretty much just to keep some play in the shocks, as they're not going to actually increase the load capacity. The same amount of weight will be on your axle either way. The 1500 doesn't have a full floating axle like the 2500 does. FF axles place the load on the wheels, rather than on the axle, as you'll find in the 1500. This means regardless of the springs you add, airbags you use, or other anti-sag devices, you're axle strength is likely to be a significant limiter. As other folks have mentioned airbags can also be used to reduce sag. You might also try timbren's suspension enhancement system (a WHOLE lot easier to install than helper springs, and they typically don't affect unloaded ride quality. A quick search will reveal though, that they have fans and "non-fans" as with air bags, or springs. I mention them only to give you options.). The timbrens will bolt on in place of your bump stops over the axle, and help reduce sag.
I would recommend though, before you massively upgrade the rear of your truck, as long as you're within spec of your towing capacity, you should seriously consider installing a weight distribution hitch. Those will do far more for your towing than simply raising the back end of your truck. Weight distribution systems will basically lift the point of connection putting more weight on the front axle and level out your rig with your trailer. The result is a far better ride, more traction control (as the weight is more evenly distributed across your rig's axles), and better rear end clearance (it'll lift your rig back up a couple inches.)
In-line sway control cams are also an amazing choice. They really do help with the load control.2006 Vortec Max 1500
-Custom Tune (389HP 440 Ft/lbs Trq - Dyno'd) | Volant CAI | Magnaflow Dual-in/out Exhaust w/3" stainless pipe tips | Fully Built Transmission w/ Red Eagle Clutches & Kolene Steels w/ Corvette Servos and Stage2 Shift Kit | 35K Tranny Cooler | Mobil 1 | Royal Purple Rear Diff
-Spray-in Bed Liner
-Premium Sound w/lifetime Satellite Radio | Leather | Sunroof | Heated Seats
-Limbstriping from USING the truck (those are badges of honor)
07-19-2012, 10:34 PM #8
- Join Date
- Jul 2012
ok i was wondering the same thing, i doubt i will pull a 20 foot trailer but a car trailer for sure, when we loaded my old 3/4 ton on there my truck almost bottomed out, keeping the clowns load it front forward. but i guess some bags would be the way to go? i want to help the sag but if i want more strength then i need a axle? is changing the rear end really the way to go in my case? would i have to do something with the front since i have a 4x4? what cost could be expected or what leafs should i look at i will research the timbren's suspension enhancement system more later i wanted to post first long day at work ugh...2004 Chevy Silverado z71, second owner
1994 Pontiac Trans Am GT, yellow, Hard top (yup its a GT):glasses:
By agteacher in forum Chevy Parts eBayReplies: 0Last Post: 01-12-2011, 07:57 AM
By fxracerx in forum Lifted & Offroad SuspensionReplies: 4Last Post: 06-22-2010, 12:40 AM
By silvertruck in forum Lifted & Offroad SuspensionReplies: 9Last Post: 05-17-2010, 02:02 PM
By browenb in forum Lifted & Offroad SuspensionReplies: 6Last Post: 12-30-2008, 10:48 PM
By hutch_pt in forum Lifted & Offroad SuspensionReplies: 1Last Post: 06-05-2008, 05:21 PM