Results 11 to 20 of 21
07-23-2012, 01:14 PM #11
I'm interested more in the parts list, than the prices; just to see what all you went with exactly. I have an 09 with Bose+DVD, and looking for what speakers to install in it, at the moment. I have a pretty good idea of what to go with for the main speakers, but not sure what to replace the center speaker in the dash with yet.
As for the steering wheel, it should be mostly plug and play. You'll have to pull the plastic cover off the column to check if all the wires are there, but they might not be hooked up, even if the harness has them. Not 100% sure, but I think most of the cars/trucks have the wiring even if it's not hooked up on both ends, these days.
Last edited by dobey; 07-24-2012 at 08:12 AM.
07-24-2012, 02:29 PM #12
To the best of my knowledge, you can't plug-n-play steering wheels, radio buttons transmit their signal via a single wire (can-bus) and that wire doesn't exist in a truck without steering wheel controls
07-24-2012, 03:19 PM #13
07-25-2012, 01:40 PM #14
Too technical for the forum I felt so I didn't go into detail. Also there aren't LEDs in the steering wheel buttons.
07-25-2012, 02:06 PM #15
As I said before, it should be simple to add, if the wires are in the column side already. If they are, it should just be a matter of swapping the steering wheel (which one needs to be careful about doing anyway, to avoid accidentally blowing the airbag). If they aren't there, it's a bit more work, but still not terribly hard. Swapping the harness as well will be more expensive and time consuming, than difficult, really. But given the OP's comments about money, he'll probably prefer to pay the dealer to install it than do it himself, if it requires swapping more than just the wheel itself.
07-25-2012, 02:56 PM #16
Lol ok man I'm an idiot. Not like I do this for a living. There are NOT LED bulbs in the buttons they are incandescent bulbs, parts dude at a GM counter can even tell you that. Anyone on this forum can tell you that. Plus on top of that the BCM has to have the multiplexed input programmed into it and you need to make sure you have the right pin wired in on the right plug and on top of that if the truck didn't come with the data center then the BCM won't allow that input. That IS fact, it ISNT speculation and this IS coming from an advanced licensed MECP installer.
I'm not trying to be a dick but if you can say you have honestly successfully done this swap and can prove it and line it out for me then I will delete my posts.
Last edited by zigger215; 07-25-2012 at 03:03 PM.
07-25-2012, 02:58 PM #17
I've had my wheel apart as well as dozens of customer wheels apart. A few months ago i just CONVERTED my incandescent lights to LED, there is no kit for this it was a custom job. You wanna lead this guy onto thinking this is an easy thing then go for it. I'm tellin him from professional experience, it isn't a walk in the park.
Last edited by zigger215; 07-25-2012 at 03:04 PM.
07-25-2012, 03:11 PM #18
- Join Date
- Nov 2009
- San Diego, California, United States
- Blog Entries
very nice install zigg. I have 2 kicker 12" subs and aftermarket door speaker. It bumps plenty and sounds good. the only thing I don't like is that I didn't drill the holes exactly right on the rear door speakers, the screw vibrates loose causing the speaker to rattle. The speakers are a weird fit, so im just gonna swap them for something better. I got pics im my album if u care to look.
2000 Silverado, 4.8L, LS
3" Dynomax cat back exhaust
Drop-in K&N air filter
200 amp Nations alternator
KYB GR2 Shocks
Bluetooth OBD2 adapter with Torque App on Samsung Note 2
Custom Stereo System l Pioneer/ Boss door Speakers l 1200 watt Performance Teknique amp l 1 farad capacitor l 2 12" kicker comp subwoofers
Slider rear window l Locking tailgate, de-baged l 265/75/16 Bridgestone Dueler H/L tires l Fully synthetic oil l Tinted windows
4l65e upgrades - five pinion planetaries l HD sun shell l high performance band
07-25-2012, 03:28 PM #19
I'll check them out. I've got to put the rest of me interior in and then my truck and another are going to be in a photo shoot (I compete in SQC sound quality challenge and the other truck competes in SPL sound pressure level). I'll be doing a full write up on this build when I had better quality pictures. System total value you is above 12,000 bucks. I have over 80 hrs install time and almost 10 in tuning.
07-25-2012, 03:58 PM #20
By G_305 in forum Member IntroductionsReplies: 12Last Post: 01-28-2011, 01:48 PM
By jason88silverado in forum Audio, Video & Gadget TechReplies: 2Last Post: 09-10-2010, 02:20 AM
By bbolton13 in forum Audio, Video & Gadget TechReplies: 10Last Post: 04-30-2010, 09:31 PM
By ShortyzKustomz in forum Audio, Video & Gadget TechReplies: 11Last Post: 11-07-2009, 10:40 AM
By jmlaudio in forum Audio, Video & Gadget TechReplies: 4Last Post: 06-28-2009, 10:54 AM
Tags for this Thread