Results 1 to 3 of 3
Thread: Header-back exhaust
07-23-2012, 06:04 PM #1
So ive been doing some research online now and ive talked to a few mechanics, and the responses ive gotten are pretty mixed on this subject.
Im looking to do a complete redo of my exhaust system. Mostly cause its all rusted out. Ive already got some long tube headers on the way in the mail. The real interesting part is here: The 02 sensors. I know for a fact that engine and the computer DO need the pre-cat 02 sensors so that it can constantly adjust the air/fuel mixture. So ill be putting the pre-cat 02 sensors into the new pipes for sure. That leaves the post-cat 02 sensors. How necessary are they. Ive had a mechanic tell me that they are really only put in place to make sure that the cats themselves are working. They dont do anything for the engine. How true is that? Alaska doesnt have any emissions testing and i dont plan on taking my truck out of state any time soon, so if i can just drop the cats out of this i would be pretty happy. But i want to be sure about it though. Does anybody know anything pertaining to post-cast 02 sensor functionality?
Thanks!!AkRide907 - Milaud
2003 Chevy Silverado 1500HD Crewcab 6.0L
Quadrasteer, K&N Cold Air Intake, Catback True Dual Exhaust
"Welcome to Alaska... where its cold as f**k, and we go hard with our trucks."
Next project: Install Long Tube Headers w/custom header back exhaust pipes
07-25-2012, 04:37 PM #2
- Join Date
- Oct 2009
I can't say for sure, though I doubt it would have any effect on the engine. I have know people running without cats and not had any problems. I think they ran a bypass or something for the rear sensors so they wouldn't have the check engine light come on. Some tuners allow you to shut off the rear sensors as well. I had a 96 t-bird with a gutted cat and it never had any problems but I can't remember if it had an after cat sensor or not.2006 Silverado Crewcab 5.3l, has a modified airbox with drop-in filter.
Mods to come:
07-27-2012, 03:12 PM #3
- Join Date
- Jun 2012
I can tell you from what I learned from doing longtube headers on my 2011 Camaro SS. If you're gonna install longtubes, then to get the most out of them (performance and efficiency) then you'll want to get a tune. The mechanic is correct that they're there to tell the ECU that the cat is working correctly. But with the LT's the sensors are further away and the temps won't register right. Have your tuner program the ECU for the rear O2 sensors to "not reporting", that way you don't get the dreaded check engine light.
I tried to fool the ECU with O2 extenders/bypass whatever you want to call it, and it didn't work. The check engine light still came on. It took a little longer, but still came on (300 miles of driving vs. 100 miles). If you're gonna have it tuned then it won't take much to program the ecu vs. jury-rigging something and hope to keep the check engine light off.
Last edited by nancygrl; 07-27-2012 at 03:16 PM.
2011 Camaro SS/RS
1997 Silverado X-cab 4x4
By Macattac3572 in forum Performance & FuelReplies: 6Last Post: 03-18-2013, 08:37 AM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 07-19-2012, 11:30 PM
By cal30_sniper in forum Chevy Truck AccessoriesReplies: 1Last Post: 10-17-2009, 10:28 AM
By diaowens in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 03-09-2009, 01:50 PM
By TrailLeadr in forum POLLing placeReplies: 6Last Post: 07-15-2007, 05:12 PM