Results 1 to 4 of 4
Thread: Clunking Noise First Problem
07-24-2012, 09:06 PM #1
Clunking Noise First Problem
Ok So I pretty much baby my truck. After getting home I put my truck in reverse to back into the driveway and, clunk? I put it in park and said maybe it was something else. I put it back in reverse and another clunking noise... I put it into neutral and then drive and it also clunks in drive. Im not really familiar with RWD vehicles so I couldnt tell you what anything is under there besides the exhaust, differential, and driveshaft lol. What could be causing this clunk? Think the dealership will repair it under the warranty?
07-26-2012, 01:14 PM #2
- Join Date
- Apr 2011
Sounds like the slip yoke needs grease, took in my truck for this and they replaced the whole drive shaft.
07-27-2012, 04:44 PM #3
Ok, Thanks for the reply!
07-27-2012, 06:51 PM #4
If your truck has the torsion spring front end, check the rubber mounts at the ends of the torsion bar crossmember. If the rubber bushings are blown out, thats probably the problem. Not a big deal to replace, but you'll need a electric grinder to grind down the rivit heads.You're driving is WAY more offensive than my swearing, assjack!!!
By My98Suburban in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 8Last: 01-24-2012, 10:53 AM
By 5.3silverado in forum General Chevy & GM Tech QuestionsReplies: 7Last: 11-13-2010, 07:07 PM
By 4dafunofit in forum GM PowertrainReplies: 5Last: 10-25-2010, 11:32 AM
By helomech09 in forum General Chevy & GM Tech QuestionsReplies: 9Last: 07-31-2009, 07:46 AM
Tags for this Thread