Results 21 to 25 of 25
09-10-2013, 11:52 AM #21
Fellow '01 owner here. Good looking truck. It's coming along nicely. You're putting money into yours like I am into mine. It's fun to see how long we can keep them going.Clint (TX) 2001 Silverado LS 4.8L auto 2wd ECSB [GARAGE]
Gasoline or gunpowder: If you ain't burning one, you ain't having fun!
NRA Endowment Member 5 24 48 88 - Hendrick Motorsports FTW!
09-10-2013, 11:52 AM #22
where did you find the camo headliner and door panels??
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
09-10-2013, 03:19 PM #23
When are you going to camo the seats?
2013 Silverado LTZ White Diamond Crew Cab
Advent OGM1 Navigation
Husky Liners GearBox Underseat Storage
EGR Rail Caps
K&N Air Filter
Flowsound 40 Muffler
Hypertech Max Energy Tune (only top end limiter removed and AFM disabled)
Chrome Tailgate Handle Cover
TonnoPro HF-155 Tonneau Cover
WeatherTech Front and Rear Splash Guards
Husky Liners X-Act Contour Floor Liners
WeatherTech Side Window Deflectors
09-10-2013, 04:06 PM #24
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Have to say the headline says it right You are in it for the Long houl.. And it shows Great work... keep it up08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
09-10-2013, 08:52 PM #25
Appreciate it @McClintoc
@Pikey- I got the camo door panel material from Hancocks in Jacksonville, but its just regular Mossy Oak Infinity Break Up material...can find it around hunting season a lot. I got the idea from a guy on Carolina Squat's facebook after he posted a picture of his Z's interior being all Mossy Oak duck/marsh camo...
@stchman- Funny you mention that...My parents asked what I wanted for christmas and I told them Mossy Oak Infinity Break Up seat covers, steering wheel cover, and floor mats lol. So hopefully christmas will be a promising time for the seats. I would have just recovered the seats in camo but that takes a lot of material and I have never recovered seats and the material is so thin that I bought I'm sure it would rip...
@Enkeiavalanche- appreciate it! I try to do the best I can but it seems to take twice as long for me to get things the way I want opposed to my friends which is perfectly ok just aggravating at times...if you think I'm doin attention to detail on this...You should see my Rancher lol...its damn near perfect lmao
Thanks for y'alls opinions and feedback :D Pics comin in 5 minutes or less...litterally unless we get busy lol
- - - Updated - - -
Oh and I forgot @McClintoc...I had to order the headliner material online which it honestly needs to be redone due to me not leaving enough overhang on the ends and it sags a little towards the back on the passenger side and thats because i didnt get all the foamy stuff off...we did the headliner in my dad's F-superduty dump truck and it is PERFECT...
- - - Updated - - -
Ok so some more pics of the finished product...the ground to fender measurement was 38.5" I think...one of my buddy's was telling me that 35s would fit and we argued a bit and measured n yada yada lol sorry I did not take before measurements...I was just excited I was getting a lift kit lmao.
Fixing our first problem...
With the light covers on...
And yea I know I need an alignment baddd
And these are some pics I put on instagram and facebook with filters lol
Posted up next to my buddy's Z71 with about 8-10" of total lift...mine still looks like a lil play toy next to his
And this is a normal comaprison of how low mine sat when I first got it. Next to my dad's bone stock 03 2wd w/t.
I don't remember if I had mentioned this in the first post today or not, but I had a 2" Daystar leveling kit (spacers) on it before I put the lift kit on, and still do. So, it's a total of 6.5" lifted from the stock height. I still have the 3" blocks to go in the back but I'm still not certain if I'll put them on or not. Some of my buddies are trying to talk me into putting drop shackles on the back but I told them no or at least not until I put 33's or 35's on it and see how it looks.
One last pic ;)
Lay'd back livin' lol hope yall enjoy
Why Squat when you can Lean?
2001 Chevrolet Silverado Stepside:
Gibson side exhaust, Airaid CAI, Daystar Leveling kit, Diablosport Predator, Deezee Black Bull bar, KC Daylighters, GT styling smoked headlight covers, Wilson 2 meter, Uniden VHF, Radioshak Whip antenna, 5% tint all around, Sony Xplode radio, blacked out bow tie and 3rd brake light...More to come REAL soon :fighting0040:
By parts bot in forum Chevy Trucks For Sale eBayReplies: 0Last Post: 05-08-2012, 11:00 PM
By parts bot in forum Chevy Trucks For Sale eBayReplies: 0Last Post: 01-31-2012, 07:50 PM
By Tripleblack in forum GM PowertrainReplies: 14Last Post: 01-29-2012, 12:43 PM
By parts bot in forum Chevy Trucks For Sale eBayReplies: 0Last Post: 01-23-2012, 09:00 PM
By Ksteele in forum Performance & FuelReplies: 4Last Post: 10-24-2008, 03:03 PM