Results 1 to 1 of 1
08-01-2012, 05:53 AM #1
- Join Date
- Aug 2010
HELP! Fog Lamp Install Gone Wrong
I bought the fog lamp kit from GM Parts Direct. Took quite sometime to get everything installed, but i was careful with each step. Problem is the lamps do not turn on when the button is pushed. Attached are pictures of the directions I followed and a picture of the block connector indicating where I installed the wire for the fog lamps.
Has anyone has this problem besides me? If, please point in the right direction. Also, i checked fuses and everything looks fine. I think the problem may be I have the wire look in the wrong place?
UPDATE: PROBLEM RESOLVED - HAD TO REVERSE THE WIRE TO THE OPPOSITE SIDE OF THE BLOCK CONNECTOR.
Last edited by cjt28; 08-01-2012 at 02:19 PM. Reason: UPDATE: PROBLEM SOLVED
By aloxdaddy99 in forum The Coffee Shop ~ Chit ChatReplies: 1Last Post: 11-30-2011, 09:38 AM
By Mike TattooMan Burton in forum Chevy C/K Truck ForumReplies: 8Last Post: 10-29-2011, 01:53 PM
By 1slols1 in forum Performance & FuelReplies: 2Last Post: 11-30-2009, 05:58 PM
By mike54 in forum GM PowertrainReplies: 2Last Post: 12-22-2008, 08:41 PM
By billw in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 03-09-2008, 11:31 AM
Tags for this Thread