GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 1 of 1
  1. #1

    Default HELP! Fog Lamp Install Gone Wrong

    I bought the fog lamp kit from GM Parts Direct. Took quite sometime to get everything installed, but i was careful with each step. Problem is the lamps do not turn on when the button is pushed. Attached are pictures of the directions I followed and a picture of the block connector indicating where I installed the wire for the fog lamps.

    Has anyone has this problem besides me? If, please point in the right direction. Also, i checked fuses and everything looks fine. I think the problem may be I have the wire look in the wrong place?

    UPDATE: PROBLEM RESOLVED - HAD TO REVERSE THE WIRE TO THE OPPOSITE SIDE OF THE BLOCK CONNECTOR.
    Attached Thumbnails Attached Thumbnails IMG_0918.jpg   IMG_0920.jpg   IMG_0918.jpg  
    Last edited by cjt28; 08-01-2012 at 02:19 PM. Reason: UPDATE: PROBLEM SOLVED

Similar Threads

  1. that was wrong
    By aloxdaddy99 in forum The Coffee Shop ~ Chit Chat
    Replies: 1
    Last Post: 11-30-2011, 09:38 AM
  2. 4.3 to 5.7 swap (not about the install more of a what do I wanna do before I install)
    By Mike TattooMan Burton in forum Chevy C/K Truck Forum
    Replies: 8
    Last Post: 10-29-2011, 01:53 PM
  3. Could there be something wrong?
    By 1slols1 in forum Performance & Fuel
    Replies: 2
    Last Post: 11-30-2009, 05:58 PM
  4. What could be wrong with my 4x4
    By mike54 in forum GM Powertrain
    Replies: 2
    Last Post: 12-22-2008, 08:41 PM
  5. wrong oil
    By billw in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 03-09-2008, 11:31 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •