Hey all, new to the forum and looking for some advice on a current project that I have underway, My baby is a 1996 K-1500 extended cab and the fuel pump went out yesterday. I know it is the pump because the relay, fuse, etc. are good and there is no pressure in the fuel system.

I opted to remove the bed and tackle this from the top instead of dropping the tank. Once I removed the bed, I realized that the tank is actually a replacement that the guy before me put in: its a 1997 tank from a salvage yard (see all photos below).

Just looking for any advice from experienced folks out there as I move into the project of putting in the new pump. The main question I have is, do I need to get a pump that is actually for a 1997 truck since it is a '97 tank, or will a replacement of the original '96 pump work?

Other questions below under the pictures. Thanks for your help!

Click image for larger version. 

Name:	2012-08-01_20-05-57_476.jpg 
Views:	109 
Size:	63.8 KB 
ID:	42456

1. Advice on getting it out without getting carloads of rust in the tank
2. Other than the large vent line, what are the other 3 lines and how do make sure I hook them back up correctly to the new pump?
3. Any other advice you have.

Click image for larger version. 

Name:	2012-08-01_20-06-10_522.jpg 
Views:	99 
Size:	62.7 KB 
ID:	42457Click image for larger version. 

Name:	2012-08-01_20-07-16_466.jpg 
Views:	100 
Size:	41.5 KB 
ID:	42458Click image for larger version. 

Name:	2012-08-01_20-13-56_506.jpg 
Views:	110 
Size:	61.7 KB 
ID:	42459