Results 1 to 4 of 4
08-03-2012, 11:41 PM #1
How to move the Heat/AC fan control to your roof console
So my silverado has a space in the roof console that will fit the control panel for the heat/ac, fan control, etc.
I know allot of suburbans, tahoe's, yukons, etc have this setup. So I stopped by the dealer today and asked them what wiring harness I would need to make that move and they had 10 different options.
So they took my VIN and called GM and they were even more clueless as to which one to use.
I assume I need to get a cable to go from the current location, up the driver side pillar around the window and then above the headliner to the roof console.
Anyone have any suggestions, or a Silverado, Suburban, Tahoe, Yukon from 1999-2003 NBS where they could get me a part number or something.
It would be nice to free up that space in the dash for something else.
08-04-2012, 02:14 AM #2
Nak I would look at a junk yard for that. Here is a link to a list of the local yards.http://www.junkyards.com/directory2/...a/raleigh.html
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
08-04-2012, 11:35 AM #3
I have a climate control unit from a suburban laying around that came in the overhead console I bought. It is smaller than the main one and the main one will not fit in there without a lot of modification - the console itself might have to be widened to accomodate that. You also won't be able to use the tahoe/suburban piece there because it doesn't have all of the functions of the main unit.
Your best bet on wiring if you decide to do it though, would probably be to run a set of wires up your pillar beside the windshield, label each at both ends for which color it goes to, cut the plug off, solder the wires in its place and reattach the plug at the other end.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
08-04-2012, 01:33 PM #4
This approach allows you to keep your oem plug ... and extend it ... and if you ever want to revert, you can by simply remove the makeshift extension noted, above, and replace the overhead with something unmodified.
By bates2121 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 11-20-2012, 08:10 PM
By rdc500 in forum Chevy C/K Truck ForumReplies: 0Last Post: 10-27-2011, 10:57 PM
By DTACA Burban in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last Post: 08-28-2011, 09:16 AM
By jjjg_02 in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 10-21-2010, 04:04 PM
By parkersnine in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 07-24-2010, 11:14 PM