Results 1 to 4 of 4
Thread: lift n tire fitment?
08-05-2012, 11:39 AM #1
- Join Date
- Jul 2012
- Fort Stewart, Ga
lift n tire fitment?
i have a 08 nnbs scsb 4x4. im puttin 7.5" sus. lift. now my question is, im puttin m 37's on and i'm wonderin if i can just do the 7.5 + a 1.25" body lift to fit the 37s, or do i have to get a 3" body?
08-12-2012, 10:28 AM #2
depending on how wide the tire is and your rim width and back spacing but yes you will need a 3" im running a 8"lift with a 2"spacer and i need a1.5" body with my cut out fenderflares to run a 36x15.5x20 on a 20x12 rim
Fabtech/Banks Ram Air |Fuel Off Road/ 315/70/17 duratracs |Hyper tech / Spencershids |Color Matched Bowtie |15% Tint on Front Windows|20% Tint on Back Windows
Chevy Ridin' High
"Black rims are as cool as a boner at a swim meet"
08-15-2012, 12:09 PM #3
you will need a 3in body lift to make the 37s fit. i had tried on my buddies truck with the 1.25 and was just shy of enough room.
2010 Silverado Z71
"Fueled by Haters"
TCS front box 7"-9" set at 8.5" | FTS coilovers(blue coil) with resis and FTS shocks with resis| 20" Fuel Off-Road Revolver Rims | 35x12.50 Nitto Trail Grapplers | Halo Projector Head Lights by Recon- Black | Led Taillights by Recon- Smoked | Dumped Straight pipe | Volant CAI | Ranch Hand Front Bumper | DiabloSport Trinity Programmer | Tow Mirrors with Turn Signal | Cervinis Ram-Air hood | 4.56 USA gears with tru trac locker | Longshot Lighting 6000k 55w low beam and 6000k 35w fogs HIDs | 7" lift leaf spring | Blue TCS traction bars
Future Mods: Long tube headers | Custom tune | Cam | Stall Converter
08-15-2012, 06:16 PM #4
- Join Date
- Dec 2011
- Jacksonville, FL
You're definitely gonna need the 3" body lift, thanks to GM's squared wheel wells!!!
By adampaul1964 in forum Wheels & TiresReplies: 33Last Post: 09-01-2013, 03:19 PM
By sledingchevy in forum Chevy Truck TalkReplies: 3Last Post: 04-26-2012, 03:50 PM
By monkio in forum Wheels & TiresReplies: 0Last Post: 03-29-2011, 11:20 PM
By troyb in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last Post: 11-18-2010, 10:50 AM
By drillRR in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 03-30-2009, 07:29 PM
Tags for this Thread