Results 1 to 9 of 9
08-05-2012, 11:13 PM #1
Transmission mount bolts falling out!
This is an odd issue that I have never seen before... The two bolts that hold the tail end of the transmission to the cross member keep falling out. I have replaced them 4 times now. Usually, one is gone and the other one is loose. Sometimes they are both gone...
Heres the thing... I am using M10/1.50 bolts each time I replace them. I use loctite, lock washers and really torque them down. The holes are not stripped. I can get them in there tight but they keep falling out. I have a feeling that the M10x1.50 is not the correct bolt, even though the factory manual says they are.
Anyone else have this problem? What do ya do about this?! Anyone know the correct bolt size?"It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
08-06-2012, 12:38 AM #2
That is an odd issue! How does the actual mount look? Is it badly deteriorated? One way to fix them from coming loose would be to use castle nuts and cotter pins. But that is just a remedy for now that doesn't sound like it actually fixes your underlying problem.
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
08-06-2012, 01:08 AM #3
Wow, strange indeed!?!? So I take it your tranny mount has threads in it instead of a through hole that a bolt and nut would use?
08-06-2012, 10:26 AM #4
Yes. The tail of the transmission has mounting tabs with threaded holes. The bolt goes up through the crossmember and threads into the tabs on the tranny. The mount is fine and the threads on the tranny are not stripped out. The holes do not go all the way through the mount tabs... Otherwise I would get longer bolts and put nuts on the top. This one has me scratching my head...
08-06-2012, 11:36 AM #5
08-06-2012, 11:55 AM #6
08-06-2012, 12:25 PM #7
you could try tack welding the heads of the bolts. other wise, go to the hardware store and try a few different metric and standard bolts in the holes.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Aidaid MIT - Tekonsha P2 - ARS Billet Grill
08-06-2012, 02:58 PM #8
08-07-2012, 01:56 AM #9
Could you try some stage 8 fasteners perhaps? They're designed to use some type of metal potrusion to keep them locked such as you have with headers. But I know guys that have used them in other applications as well.
By palmer_df0130 in forum Chevy Silverado Forum (GMC Sierra)Replies: 11Last Post: 05-05-2012, 11:45 PM
By Outlaw19 in forum Chevy Truck TalkReplies: 13Last Post: 04-10-2012, 11:25 AM
By gregsenne in forum Chevy C/K Truck ForumReplies: 1Last Post: 10-31-2011, 06:39 PM
By Steve in forum Chevy Car ForumReplies: 1Last Post: 03-28-2011, 11:16 AM
By Tom Evans in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 04-13-2008, 10:09 PM