Results 11 to 17 of 17
09-09-2013, 04:59 PM #11
If you are still under the 3/36K then yes. If past that, then no.
- - - Updated - - -
- - - Updated - - -
I assume your wheels on the 2500HD are the painted steel wheels? GM Customer Service actually said this to you?
2013 Silverado LTZ White Diamond Crew Cab
Advent OGM1 Navigation
Husky Liners GearBox Underseat Storage
EGR Rail Caps
K&N Air Filter
Flowsound 40 Muffler
Hypertech Max Energy Tune (only top end limiter removed and AFM disabled)
Chrome Tailgate Handle Cover
TonnoPro HF-155 Tonneau Cover
WeatherTech Front and Rear Splash Guards
Husky Liners X-Act Contour Floor Liners
WeatherTech Side Window Deflectors
09-09-2013, 06:36 PM #12
- Join Date
- Sep 2013
The wheels are polished aluminum and some kinda clear on them. The clear has bubbles in it if you open them up dust from the aluminum oxadizing comes out. The chrome coming off the door handles is so bad it'll cut you if you slide your hand on it. But where do you go next.
09-09-2013, 06:53 PM #13
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
09-10-2013, 07:15 AM #14
- Join Date
- Sep 2013
My Silverado is a 2011. The door handles are OEM
09-17-2013, 03:00 PM #15
- Join Date
- Jan 2011
I have a 2011 with cracks in the chrome clad plastic covers. My service manager has agreed to replace them, but I do not want the same wheels as they will do the same. Another stupid idea by gm! I just had my truck in for the latest revision (5th or 6th) and was disgusted with gm's pathetically engineered solution to the cabin noise problem! A couple 9 yr Olds with crayons could do better! (trying to stick pieces of closed-cell weatherstripping to a plastic-covered bitumen based noise dampening pad, proves incompetence.) I am so disgusted with gm that I will not buy another product and am currently shopping for a new vehicle for my wife. I am told the 2014 trucks have successfully solved this issue. Proof that GM is clearly focused on sales and not customer care.
I believe that people spending this much money need to stand up to gm and hold them accountable. I have a great relationship with my service department and will miss them. GM-not whatsoever!
Gm's cabin noise repair has plugged up the cabin vents so much that when the fan is running it is working exponentially harder than it should and is forcing air out the poor Window and door seals so badly that it whistles! Now this is the best they can do for a $50,000+ vehicle after 3years of their best problem solving.
Last edited by almo; 09-17-2013 at 03:11 PM.
09-20-2013, 06:50 PM #16
I have 2000 oem silverado aluminum polished rims. these are OEM clear coated aluminum. what I did was spray these wheels and the bumpers and side body strips with silicone lube spray and wipe off excess. so far they still looking good.
now on the inside of these wheels there is a coating on the aluminum that was turning to corrosion[white power fluff]. I washed the surface down with paint thinner to remove all oils after a good washing with dish soap to clean off the dirt. I even did a light sanding of the surface to get down to a solid shine surface . I then sprayed this interior inside surface of the rim with a dry antisieze spray coating designed to protect metal from salt corrosion which dries in about 2 min. that was 12 years ago. every 5 years or more when I get my tires replaced I do a very light touch up...look pretty good for a rust belt vehicle 13 yrs old.
I do know of wheels from GM that had metal chrome peel. some GM wheels where so bad that they caused brake issues and all kinds of scraping sounds and this was on the expensive caddy vehicles.
GM knows all this so that is why you get a 1 year on these issues....this should come with the 7 year 70,ooo mile corrosion warranty.
I had some rust form under my driver door at the door skin seam. the GM dealership repaired it by just spraying over the rust as the vehicle had 30,000 miles on it ... so much for quality repairs from them . no work is or has any warranty for rust issues after they fix it ...this is why they do what they do .
when I brought the vehicle back the next year the manager stated "you what this to last forever or what "!
10-24-2013, 10:38 PM #17
I drove a 2014 and they have not fixed the wind noise issue.2010 Chevy Silverado Z71 ext cab.4x4
72 Monte Carlo 350-415 hp- sold (June 2011) to pay medical bills
79 Impala 350 4bbl 375 hp- sold (June 2011)to pay medical bills
"If He asks you to go a mile go two"
By Tritonhoward64 in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last Post: 11-28-2010, 05:48 PM
By blueZ71 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 01-02-2009, 08:52 PM
By gmcjimmy88 in forum Chevy Truck AccessoriesReplies: 3Last Post: 06-16-2008, 11:07 AM
By Steve in forum Photo & Video GalleryReplies: 3Last Post: 03-26-2007, 11:11 AM
By Shellyne in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 4Last Post: 10-11-2005, 03:58 PM
Tags for this Thread