Results 1 to 1 of 1
08-06-2012, 05:52 PM #1
For Sale: ZL1/LSA Supercharger *COMPLETE KIT*
In light of the introduction of the new ZL1 Camaro and the success of the LSA platform in the CTS-V, we have decided to stir the performance pot a bit.
$6,799.00 takes it home
Here's a brief description:
We recently acquired a nice little kit for the person who wants to install a LSA blower onto their LS3/L92/L99/LSA headed vehicle. This kit can be compared with the kit that Chevy performance presently offers, the part number for their kit is 19244095. You will notice that it sells for roughly $7,000. they describe the kit as including "a fully assembled system with the supercharger intake, fuel injectors, cast cover, intercooler, front pulley, throttle body and gasket set".
Here is what you get in our kit:
a fully assembled system with the supercharger intake, fuel injectors, cast cover, intercooler, front pulley, throttle body and gasket set......., as well as all the misc evap solenoid, fittings and missing sensors.
We also include the front drive accy setup. Part #'s 19243525, and free optional upgrade- 19094106.
We also include the PCM, a factory CTSv engine wiring harness, a replacement Mass air sensor for the forced induction.
ALL parts are factory General Motors parts unless otherwise noted. ALL parts are brand new in the box.
NOTE: this will require professional tuning, and will require harness modification.
I totaled up everything in the kit and it retails for more than $13,000
$6,799.00 takes it home.
Please feel free to ask any questions! PM or E-Mail Billy@NightmareBreedMotorsports.com
Attachments shown with optional fuel pump upgrade
"If you're not living life on the edge, You're taking up too much space"
"Truck Norris"- 2008 TX Edition Silverado
- McGaughy's 4/5 Drop Kit
- Apline Type R 10s & Amp
- Pioneer 6 Disc Touchscreen Deck
- Nightmare Breed Motorsports custom tune
- Custom 3" dual exhaust through x-pipe dumped at axle
- Airaid CAI
- Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
"Kristine" - 1991 Nissan 240sx
- Cut to pieces, LS build pending
By rshepard in forum General ClassifiedsReplies: 2Last Post: 05-06-2012, 02:11 PM
By suzukiracer in forum GM PowertrainReplies: 2Last Post: 12-12-2011, 09:19 PM
By 06MonteSS in forum General ClassifiedsReplies: 0Last Post: 09-04-2011, 12:57 PM
By 1LOW4X4 in forum Chevy Truck AccessoriesReplies: 3Last Post: 01-23-2011, 07:08 AM
By jbattlesjr in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last Post: 07-25-2010, 10:05 AM