GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2

Thread: Air tool?

  1. #1

    Default Air tool?

    I have a Ingersoll Rand 236G impack wrench. The wrench works ok it will bust the lug nuts loose on my truck pretty easily. I torque all of them down to the recomended 140 ft. lb. I found out inadverdently today that I have it all set up wrong! I called IR today to aske about the grease fitting. The rep told me I should re grease the gun every 40 hours or so of actual use. I would have to bust loose something like 8,000 lug nuts to hit 40 hours of use. So I guess I'll just do it once a year when I do my compressor or maybe ever couple years. But that may not be needed. Anyway I told the rep I was bran new to air tools and they gave me very detailed break down of how to set it up properly. Wow I was way wrong. For instance the manual says 90 psi. I though that ment you set your regulato to 90 psi and bang away. Wrong they told me to set it up so when I pull the trigger the psi does not drop below 90 and 100 psi is the max. I was also instructed with a 3/8 inch hose and 1/4 inch fittings 25 foot was the max. I'm using a 50 foot hose. So I can leave the compressor in place and run the hose to my truck in front of the garage. I ran out and purchased a 25 foot hose and set up regulator as instructed. WOW this think really came alive. But the hose is too short I need 50 foot. They told me I needed a 1/2 inch hose to go 50 foot and 3/8 or bigger fitting. I am going to order a 50 foot 1/2 inch hose with a real. Would I be better off going with 3/8 inch or 1/2 inch fittings? Also how do I go to a larger fitting on the tool? The tool has a 1/4 inch inlet bushing, can this be replaced to accept a larger fitting or do I just use a thread adapter? Thanks!!

  2. #2

    Default

    Could probably use a thread adapter for it but hey what do I know?



    If at first you don't succeed, chances are, you are using too small of a cheater bar

    Current:
    1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
    Future:
    Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
    US Navy Sailor :sign0011:

Similar Threads

  1. New tool box
    By reggiecab2000 in forum The Coffee Shop ~ Chit Chat
    Replies: 11
    Last Post: 12-13-2011, 11:45 PM
  2. Bed Tool Box
    By ..chevy4life.. in forum Chevy Truck Talk & News
    Replies: 6
    Last Post: 04-20-2011, 05:37 PM
  3. New Tool Box.
    By Jimmeh in forum Photo & Video Gallery
    Replies: 14
    Last Post: 12-25-2009, 12:23 PM
  4. Always use the right tool!
    By bry2500 in forum The Coffee Shop ~ Chit Chat
    Replies: 9
    Last Post: 06-02-2009, 10:13 PM
  5. Tool Box ??
    By 2loud in forum General Classifieds
    Replies: 1
    Last Post: 02-23-2007, 07:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •