Results 1 to 10 of 11
Thread: AirAid MIT
09-14-2012, 02:22 PM #1
Hey guys I just ordered my scan cable for bb and am really excited to see the power difference. I have put in a k&n filter and thought about putting in the airaid mit. I'm just not sure if its really worth the money or is the filter good enough? It's either I get this or some HID's.
Last edited by Steve; 09-14-2012 at 05:49 PM.2004 GMC Sierra SLT 6.0L 4x4
UWS Low Profile toolbox 10% tint front and over stock back tint
AirAid MIT and K&N airfilter BlackBear Performance
09-14-2012, 03:29 PM #2
If you're getting the Airaid filter, and thinking about the intake tube as well, just get the Jr kit which includes both. The stock intake tube is more of a bother than the filter is. I installed the Jr kit on my truck and it just sounds better.
It was a bit of a pain to install though, as getting the clamp rings around the silicone attachments once it's on the tube can be a challenge, as can getting the tube to fit in properly, but it's definitely worth it; and it still looks like it could be stock, which is nice.
I say do it. My Avy loves it.
09-14-2012, 05:04 PM #3
Yeah I have a k&n drop in filter so all i'm looking for is the intake tube
09-14-2012, 05:29 PM #4
I've had a terrible time finding the right projector housings for my Avalanche. I found a set that looked nice, but when I got them, and a good HID kit, the bulbs were too long as the housings were only designed for halogen (but no sellers, nor the manufacturer web site said so). And I wasn't having great luck dealing with their support department, so I had to return those. Found another set that looks a bit closer to stock than the ones I got, but not having any luck getting them to tell me if the xenon bulbs will fit or not, either. :(
It might be easier to find good projector housings that can fit xenon bulbs for the Silverado though. They are a little different, but I haven't tried to look for them really.
But with all that, yeah, get the intake tube. It sounds, and looks, much better than the bulky and oddly shaped stock tube.
09-14-2012, 05:40 PM #5
09-15-2012, 12:06 AM #6
Just bought the airaid mit, I saw blackbears dyno on several intakes and was the best even out of the full intake!
09-15-2012, 02:38 PM #7
- Join Date
- Sep 2012
This morning I put on the Airaid MIT on my 2012 Sierra 4X4 XLT -Black with 1,200 miles on it. It took me about 45 minutes. I got hung up on trying to remove the air hose from air valve stem trying not to break the connector--there is a push-in release that is hard to see. I could tell an immediate difference in the truck. Throttle response is obvious immediately. There is no hesitation starting from a stop and the idle seems to be smoother. Also, it sounds awesome when you get on the throttle. The truck seems like it can breathe better and is much happier. I read where the MIT and K & N air filter combination was the best. The K & N is being shipped from Amazon now. Total invested between the two--$155. Cheap Mod and well worth it. I hope it helps with gas mileage. I will post results soon.
09-21-2012, 06:27 PM #8
I got mine yesterday and installed it today to go with the k&n filter I already had. It was a piece of cake to put on. I think it sounds great, I haven't had a chance to get it up and going yet. I got a great deal it only costs $80 on amazon. I'll try and get some pics on here and a before and after video. I am taking a video from before, then after the intake, and finally after bb tune.
09-22-2012, 03:27 PM #9
ive been toying with this as well, i have a K&N drop in filter, and been looking at the intake tubes. sounds like this may be my next mod.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Aidaid MIT - Tekonsha P2 - ARS Billet Grill
09-23-2012, 08:34 AM #10
Yeah you should definitely go for it. It's been proven to be better than the $300 intakes
By Pruett in forum Performance & FuelReplies: 3Last Post: 11-15-2011, 05:54 PM
By Pruett in forum Performance & FuelReplies: 3Last Post: 10-30-2011, 11:01 PM
By KWG08VMI in forum Performance & FuelReplies: 2Last Post: 11-29-2010, 05:27 PM
By ToTallScott in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 06-11-2010, 10:25 AM
By mburn039 in forum GM PowertrainReplies: 2Last Post: 05-25-2009, 11:06 PM